Wanted - Inner Wheel Bearing Seal

Banshee · 14-01-2014, 13:57

As above, I did my wheel bearing last night (in the process of knocking up a workshop download)

I noticed though that the bearing has been replaced before and whoever did it last time has smashed the hell out of the old bearing seal which means it wasn't waterproof (probably why the bearing failed)

The new bearing kit didn't contain a new seal so I'm on the hunt for one, does anyone have an old hub anywhere that they could donate or sell me

Many Thanks

Banshee · 14-01-2014, 21:24

Quote:

Originally Posted by Banshee

As above, I did my wheel bearing last night (in the process of knocking up a workshop download)

I noticed though that the bearing has been replaced before and whoever did it last time has smashed the hell out of the old bearing seal which means it wasn't waterproof (probably why the bearing failed)

The new bearing kit didn't contain a new seal so I'm on the hunt for one, does anyone have an old hub anywhere that they could donate or sell me

Many Thanks

I've just found this;
http://www.ebay.co.uk/itm/NISSAN-TER...item3a8444627c

That will fit my Maverick right?

solarman216 · 14-01-2014, 23:19

I doubt it and I would not be using a used one, I have a couple here but they will be tired and do not like being punched out of one hub and pushed into another, just stump up and buy a new one, Rick

Banshee · 14-01-2014, 23:53

Quote:

Originally Posted by solarman216

I doubt it and I would not be using a used one, I have a couple here but they will be tired and do not like being punched out of one hub and pushed into another, just stump up and buy a new one, Rick

You try and find me a new one

solarman216 · 14-01-2014, 23:57

OK will see what I can do tomorrow with my bearing supplier, only have to give him a seal number and he has always come up with the goods, are Nissan not able to supply? Rick

Banshee · 15-01-2014, 00:00

Quote:

Originally Posted by solarman216

OK will see what I can do tomorrow with my bearing supplier, only have to give him a seal number and he has always come up with the goods, are Nissan not able to supply? Rick

Going to also try them first thing, if you can find me a seal Rick there is also a drink in it for you

AlexD333 · 15-01-2014, 00:08

Check these are ok but after a search i came up with these,

http://www.ebay.co.uk/itm/Front-Whee...item565626b951

http://www.ebay.co.uk/itm/NISSAN-TER...item4607c33aa1

http://www.ebay.co.uk/itm/SNR-Front-...item4d148dfd05

I'm no mechanic btw so get someone like solar to check

solarman216 · 15-01-2014, 00:11

Quote:

Originally Posted by AlexD333

Check these are ok but after a search i came up with these,

http://www.ebay.co.uk/itm/Front-Whee...item565626b951

http://www.ebay.co.uk/itm/NISSAN-TER...item4607c33aa1

yep they will do the job including seal, Rick

Banshee · 15-01-2014, 00:16

Quote:

Originally Posted by solarman216

yep they will do the job including seal, Rick

Thats the thing though, I've already brought the bearing kit and put the new bearings in but there was no seal

AlexD333 · 15-01-2014, 00:18

Quote:

Originally Posted by Banshee

Thats the thing though, I've already brought the bearing kit and put the new bearings in but there was no seal

Oh bugger, who did you buy from? To save a few pennies perhaps you could ask if they do a seal? I'm off to sleep now but I will have a look tomorrow for you

solarman216 · 15-01-2014, 22:27

Just been out and had a look at the two spare hub assemblies I have, one has no seal and the other is worn and damaged such that I cannot get any numbers of it, without numbers by bearing guy cannot help, Sorry, Rick

Banshee · 16-01-2014, 11:40

Quote:

Originally Posted by solarman216

Just been out and had a look at the two spare hub assemblies I have, one has no seal and the other is worn and damaged such that I cannot get any numbers of it, without numbers by bearing guy cannot help, Sorry, Rick

Not sure if it's of any use to your bearing guy but the original Nissan part number is 402320f000

solarman216 · 17-01-2014, 01:19

Quote:

Originally Posted by Banshee

Not sure if it's of any use to your bearing guy but the original Nissan part number is 402320f000

No good I am afraid, need the number of the seal, Nissan do not make seals, they buy the in and stick there own number to it, to go direct to the seal manufacturers we have to have the number printed on the seal, same goes for bearings my guy supplies them at a fraction of the dealers or car factors prices, Rick

shadowbroker · 24-06-2014, 16:12

I ended up purchasing Veco VK421 front bearing kit.

melissachels · 24-06-2014, 21:09

If it was a kit i'd go back to them & say to them that the seal was missing, It should of had the seals with it

14-01-2014, 13:57	#1
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	Wanted - Inner Wheel Bearing Seal As above, I did my wheel bearing last night (in the process of knocking up a workshop download) I noticed though that the bearing has been replaced before and whoever did it last time has smashed the hell out of the old bearing seal which means it wasn't waterproof (probably why the bearing failed) The new bearing kit didn't contain a new seal so I'm on the hunt for one, does anyone have an old hub anywhere that they could donate or sell me Many Thanks __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

14-01-2014, 23:19	#3
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	I doubt it and I would not be using a used one, I have a couple here but they will be tired and do not like being punched out of one hub and pushed into another, just stump up and buy a new one, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

14-01-2014, 23:57	#5
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	OK will see what I can do tomorrow with my bearing supplier, only have to give him a seal number and he has always come up with the goods, are Nissan not able to supply? Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

15-01-2014, 22:27	#11
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,430	Just been out and had a look at the two spare hub assemblies I have, one has no seal and the other is worn and damaged such that I cannot get any numbers of it, without numbers by bearing guy cannot help, Sorry, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

24-06-2014, 16:12	#14
shadowbroker Senior Member Join Date: Nov 2012 Location: north west Vehicle: Nissan Terrano 3.0 Posts: 192	Veco pack I ended up purchasing Veco VK421 front bearing kit.

15-01-2014, 00:08	#7
AlexD333 Senior Member Join Date: Jan 2014 Location: Uk Vehicle: 2004 Terrano 2.7 TDI Posts: 7,847	Check these are ok but after a search i came up with these, http://www.ebay.co.uk/itm/Front-Whee...item565626b951 http://www.ebay.co.uk/itm/NISSAN-TER...item4607c33aa1 http://www.ebay.co.uk/itm/SNR-Front-...item4d148dfd05 I'm no mechanic btw so get someone like solar to check

24-06-2014, 21:09	#15
melissachels Senior Member Join Date: Mar 2012 Location: Near Armagh, Northern Ireland Vehicle: half of a T2 2.7td swb Posts: 1,216	If it was a kit i'd go back to them & say to them that the seal was missing, It should of had the seals with it