Wanted. washer bottle & more

[makeitfit]

Originally Posted by puddle hoppers inc.

tighter than a gay disco!!

and so much dirtier

[puddle hoppers inc.]

eeuuuggghhh! get some side steps!!

[makeitfit]

Originally Posted by puddle hoppers inc.

eeuuuggghhh! get some side steps!!

This as close as I could get
https://www.google.co.uk/url?sa=i&rc...95009136240594

[puddle hoppers inc.]

i dont know what that was, but.. my 03 plate has a huge washer bottle on the n/side. cant be that hard to fit? whats the small bottle for?next to the expansion tank?

[R1cho]

Originally Posted by puddle hoppers inc.

i dont know what that was, but.. my 03 plate has a huge washer bottle on the n/side. cant be that hard to fit? whats the small bottle for?next to the expansion tank?

screenwash bottle

[makeitfit]

Originally Posted by puddle hoppers inc.

i dont know what that was, but.. my 03 plate has a huge washer bottle on the n/side. cant be that hard to fit? whats the small bottle for?next to the expansion tank?

Intercooler spray bottle

[puddle hoppers inc.]

wow! tiny ! my terry one is small in comparison to my old 300tdi but that is just so john barrowman......
"written before i knew it was an intercooler jobbie eek!!"

[solarman216]

only two bolts on the bottle, and the little black rubber thingie if that is what you are looking for, it is split at the bottom in the pic, only bit any good is the relay, Rick

[zippy656]

Originally Posted by puddle hoppers inc.

are you on a back hander lol? its only a tenner

I wish..


Just people kept asking where to get parts so put cncfabs into my sig.. hope it will keep my post count down a bit...

But, open to offers though

[makeitfit]

Originally Posted by solarman216

only two bolts on the bottle, and the little black rubber thingie if that is what you are looking for, it is split at the bottom in the pic, only bit any good is the relay, Rick

The little black bung is meant to have a slit in it Rick
I'll have the relay and bung then please. Oh and if you still have it, the mini plug and loom that go to the washer bottle motors

[solarman216]

Originally Posted by makeitfit

The little black bung is meant to have a slit in it Rick
I'll have the relay and bung then please. Oh and if you still have it, the mini plug and loom that go to the washer bottle motors

the rubber bung is bottom side up in the pic but it is split near the round bit at the bottom, a bit of mastic would cure it though, what loom are you looking for my bottle only has one motor with two pipes one front and one rear, motor goes one way for front tother way for rear and part of the main loom two wires, plugs straight onto the motor, the only wires I have are the low level sensor, Rick

[makeitfit]

Rick you're right, one motor and one float switch thing. Cable goes from the motor and low level thing through the wing where the glow plug solenoid was and then into a multi plug.

[solarman216]

Originally Posted by makeitfit

Rick you're right, one motor and one float switch thing. Cable goes from the motor and low level thing through the wing where the glow plug solenoid was and then into a multi plug.

Ah did not notice the multi plug, will look tomoz, Rick