Down pipe for Exaust

02-01-2007, 23:08

Hi guys has anyone got any ideas where I can get a down pipe for my exaust - tried most auto shops around Donny but found nothing the black stuff keeps blowing onto the front of van ---- if posted incorrectly sorry new at this stuff

02-01-2007, 23:42

Hawleys tyres and exhust in Sheffield fabricate exhausts and tail pipes to your design, whilst you wait. Affordable. Depending were you are in Donny about 30 - 40 mins drive: 0114 2322676

mully · 03-01-2007, 07:58

try www.formula4.co.uk in their cataloge the sell them from £24.90-£32.90 depending on size

Jocky · 04-01-2007, 17:35

Partco :smile:

05-01-2007, 20:19

thanks Guys think I will go for the sheffield option.

10-01-2007, 13:51

very sorry as i did not read the post correctly and thought you were asking about an exhaust front downpipe, i will move this back to towing,

sorry

rob

ops:

dinky · 10-01-2007, 18:16

Swifty Try a place on Carr HILL across from PEGLERS,they do exhaust fabrication and are quite cheap.Son had his s/s exhaust repaired did a good job.

10-01-2007, 23:37

I got my stainless steel exhaust trim from www.ur-motoring.co.uk 65mm bore. Works a treat no more muck on the van.

theduck · 22-07-2007, 20:41

have a look at my posting does yours leave splatter marks I had the same problem follow the link and make sure you give them the outside diameter of you exhaust

Duggysdad · 05-06-2011, 15:42

I had the same problem finding one, so I went to my local tyer and exaust place and he welded a bent bit on and now its fine only chaged me a tenna
well chuffed

02-01-2007, 23:08	#1
Swifty Guest Posts: n/a	Down pipe for Exaust Hi guys has anyone got any ideas where I can get a down pipe for my exaust - tried most auto shops around Donny but found nothing the black stuff keeps blowing onto the front of van ---- if posted incorrectly sorry new at this stuff

04-01-2007, 17:35	#4
Jocky Senior Member Join Date: Feb 2005 Location: Teesside,Englandshire, I only sleep there honest. Vehicle: Nissan Patrol 2.8 TD6 Y61 Posts: 1,420	Partco :smile: __________________ (Y61) Patrol 2.8TD6 SE Touring.DPT Box. Ironman Nitro Shocks OME Springs 20mm lift front, 30mm lift rear. 33" General Grabber AT's, Airtec Snorkel, EGR Mod. 2.5" Stainless Exhaust

05-06-2011, 15:42	#10
Duggysdad Junior Member Join Date: May 2011 Location: Stone Staffordshire Vehicle: Terrano3.0 sve auto Posts: 28	Black stuff on me van!!! I had the same problem finding one, so I went to my local tyer and exaust place and he welded a bent bit on and now its fine only chaged me a tenna well chuffed

02-01-2007, 23:42	#2
Guest Posts: n/a	Hawleys tyres and exhust in Sheffield fabricate exhausts and tail pipes to your design, whilst you wait. Affordable. Depending were you are in Donny about 30 - 40 mins drive: 0114 2322676

03-01-2007, 07:58	#3
mully Senior Member Join Date: Apr 2005 Location: dorset Vehicle: Terrano11 Posts: 112	try www.formula4.co.uk in their cataloge the sell them from £24.90-£32.90 depending on size

05-01-2007, 20:19	#5
Swifty Guest Posts: n/a	thanks Guys think I will go for the sheffield option.

10-01-2007, 13:51	#6
Guest Posts: n/a	very sorry as i did not read the post correctly and thought you were asking about an exhaust front downpipe, i will move this back to towing, sorry rob ops:

10-01-2007, 18:16	#7
dinky Senior Member Join Date: Nov 2006 Location: SOCIALIST REPUBLIC OF SOUTH YORKSHIRE Vehicle: t20 lwb Posts: 1,238	Swifty Try a place on Carr HILL across from PEGLERS,they do exhaust fabrication and are quite cheap.Son had his s/s exhaust repaired did a good job.

10-01-2007, 23:37	#8
gadgetsyd Guest Posts: n/a	I got my stainless steel exhaust trim from www.ur-motoring.co.uk 65mm bore. Works a treat no more muck on the van.

22-07-2007, 20:41	#9
theduck Senior Member Join Date: Mar 2006 Posts: 578	have a look at my posting does yours leave splatter marks I had the same problem follow the link and make sure you give them the outside diameter of you exhaust