wheel compatability

[exosteve]

Quick wheel question.
Will my t2 wheels fit a nivara? And is 31" more or less the same as 265s?
Taa

 

[AlexD333]

Quick wheel question.
Will my t2 wheels fit a nivara? And is 31" more or less the same as 265s?
Taa

If navara is 6 stud then yes, guess it's just about offset n the rest :thumb2

 

[rustic]

Quick wheel question.
Will my t2 wheels fit a nivara? And is 31" more or less the same as 265s?
Taa

There may have been a problem the other way around:augie...
There have been cases where the centre hub hole wasn't large enough to go over some Auto Hubs.

I can't recall which model or variant though...:nenau
Not even sure it was Nissan wheels either...

 

[exosteve]

Just asking as I remembered a customer of mine was after some winter tyres who owns a Nivara.
And my tyres are for sale

 

[Barrbeast]

Quick wheel question.
Will my t2 wheels fit a nivara? And is 31" more or less the same as 265s?
Taa

Centre hub shouldn't be an issue seeing as they're both Nissan (and I imagine use similar if not identical auto hubs).

Saying that Trol's generally have an issue using wheels from anything but a Trol as their hubs are particulary beefy :doh

If navara is 6 stud then yes, guess it's just about offset n the rest :thumb2

Unless someone has done some radical modification all Jap trucks (Nissan/Mitsubishi/Toyota etc) are 6 stud bud :thumbs

Steve bud, you're working with two different types of tyre code.

265 is just the width of the tyre in mm. To work out if the other tyre is the same diameter/width as your set of 31"s you'll need to know the rest of the numbers in the tyre size ie. sidewall height and the rim diameter of the tyre size before you can work out the full diameter of the tyre. Also need to know the width of your 31"s.

Example:-

265/70R16 is a tyre 265mm in width, sidewall height is 60% of width and it fits on a 16" rim = 31" diameter tyre (roughly).

31x10.50R16 is a tyre 31" in diameter, 10.5" in width and it fits on a 16" rim.

Clear as mud? :thumbs

 

[rustic]

Centre hub shouldn't be an issue seeing as they're both Nissan (and I imagine use similar if not identical auto hubs).

Saying that Trol's generally have an issue using wheels from anything but a Trol as their hubs are particulary beefy :doh



Unless someone has done some radical modification all Jap trucks (Nissan/Mitsubishi/Toyota etc) are 6 stud bud :thumbs

Steve bud, you're working with two different types of tyre code.

265 is just the width of the tyre in mm. To work out if the other tyre is the same diameter/width as your set of 31"s you'll need to know the rest of the numbers in the tyre size ie. sidewall height and the rim diameter of the tyre size before you can work out the full diameter of the tyre. Also need to know the width of your 31"s.

Example:-

265/70R16 is a tyre 265mm in width, sidewall height is 60% of width and it fits on a 16" rim = 31" diameter tyre (roughly).

31x10.50R16 is a tyre 31" in diameter, 10.5" in width and it fits on a 16" rim.

Clear as mud? :thumbs

Use the link from our down load section that will show compatability


http://www.kouki.co.uk/utilities/visual-tyre-size-calculator



Sorted..:thumb2