Washer bottle cap T2 3.0 ltr SVE

[johnb5177]

Hi guys,

For some reason best known to itself, I have mislaid the top cap off my windscreen washer bottle....:nenau

Anyone out there (possibly Rick?) likely to have one kicking around spare?

I am happy to pay with Paypal, if that is suitable, as it would have to be posted to me here in France, so please let me know...

Many thanks in advance...

Johnb

 

[solarman216]

there are several types, post a pic of the bottle top and I will see, Rick

 

[johnb5177]

Rick,
Thank you, I will do that tomorrow...
John

 

[johnb5177]

Rick,
I hope this picture will help you decide what cap I need?

 

[Banshee]

Same as mine, there is a yellow collar that goes around the bottle neck and just flips up and down with a little tabbard on the side.

I was just going to reply with, it's a yellow one but I think they were all that colour which was done by many car manufacturers to point out the major check locations that you should be looking at periodically. :doh

 

[solarman216]

Rick,
I hope this picture will help you decide what cap I need?

That is good, I will have a look on Sunday, Rick

 

[johnb5177]

Thank you...:thumb2

 

[johnb5177]

Bump....

 

[solarman216]

Sorry mate started work Sat 9am finished Sun 6am so Sunday was missed will look Monday, Rick

 

[solarman216]

Have two types, yellow is 53/54 mm and white 50 mm think you need the white one, but do not have yellow that size, Rick

 

[Blocky10]

Have two types, yellow is 53/54 mm and white 50 mm think you need the white one, but do not have yellow that size, Rick

I'll measure mine in the morning for you. :thumb2

 

[johnb5177]

Blocky,
Thank you for your help.....I am stuck for the moment with a massive lawn renovation, and trying to finish it before it finishes me.
Back in UK from Saturday for a few weeks, so cheaper and simpler postage for Rick...:thumb2
John

 

[Blocky10]

 

[johnb5177]

Blocky,
That looks correct to me, sadly though, I think Rick doesn't have this type in stock, only an alternative different size white one......
So as I don't really have a plan b, can anyone suggest an alternative supply (apart from Nissan of course)......would cncfabs perhaps have one in stock ???
Being a donut, I didn't read Rick's post correctly.......so Rick, you have this correct size in white, do you agree with Blockys caliper (flash tool that) measurements, if so please can I put dibs on it ?
If yes then we can PM to organise payment and dispatch.......

 

[Blocky10]

Looks like you'll be needing the white one, depending on where Rick took his measurements:thumb2

 

[solarman216]

yes the white/clear one is the one you want, will PM you, Rick