Turbo boost questions.

[makeitfit]

On the Black Pearl revival trail and have a few questions on turbo boost.
1st off my modded turbo needed a modded waste gate actuator too. I did that and basically had to extend the waste gate link thing. I had an old one so cut a bit off one and added it to the std bit and welded it on. I had a thread up it first and then undid it after wards.

Now I need your helpguys as to how much effort there is to pull the adjuster over the waste gate pin at rest ? Truck's not on the road at the mo so only able to run engine while parked .Basic ecu map etc

Just trying to get the coarse settings right before proper testing.
So anyone with a boost gauge, can you tell me what boost your're getting at 2000 rpm and 2500 rpm and 3000 rpm, WHILE PARKED.
Also where do you have your boost gauge connected to.
I thank you
One more for your perusal

 

[Mobieus_uk]

at rest no effort at all, there just enough tension to keep the gate in its closed position

 

[makeitfit]

at rest no effort at all, there just enough tension to keep the gate in its closed position

Brilliant, thanks very ever so :thumb2
Nice to know I wasn't too far off. It's over 3 years since I stripped it.Increased boost so a bit of tension is to be expected :sly