Terrano ride height

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Check your tyre pressures, get it on level ground and adjust the torsion bars until you're happy with how it looks. :thumb2
Take it for a drive too settle it and recheck.
You should aim for the front being slightly lower than the rear.
If you regularly carry weight, load it first. Otherwise you could end up nose high.:doh
 
This is taken from the owners manual, I would imagine it doesn't include a roof rack :nenau, yours will probably be lower due to age though, hope this helps and welcome to the forum :thumbs (oh and lets see some pics of truck :D)....

WP_20170617_21_35_43_Pro.jpg
 
Having just recently adjusted mine I now have from the floor to the wheel arch measuring through the hub

Rear 840mm
Front 805mm

No idea if that is right or not but it looks OK. If you adjust the torsion bars it seems to take a day or some fairly spirited driving for everything to settle down from the adjustment.

If you adjust too much you may need to get the tracking looked at as the wheel angle changes.
 
Me and lad up for some soft green landing had terrano from new .wife used to run it . When we started using it took it down lane got totally bogged , had to ring wife to fetch lad and get tractor to pull me out wife not amused helped us dig it out cost me two skirts three tops two coats and a seventy pound hairdos to win her round haven't really been since
 
Me and lad up for some soft green landing had terrano from new .wife used to run it . When we started using it took it down lane got totally bogged , had to ring wife to fetch lad and get tractor to pull me out wife not amused helped us dig it out cost me two skirts three tops two coats and a seventy pound hairdos to win her round haven't really been since

:lol
About time for another go then :D
 

Latest posts

Back
Top