td2.7tdi no1 injector wanted asap

[Madmark]

Mines 2002 Terrano and in need of injector one with the wire olese must be good working order. Many thanks

 

[bry]

When i replaced my No One injector last year,the truck had gone into limp mode.What was your symptoms?

 

[Madmark]

Very low on power with ecu light on counted the code and banshee just gave me how to read ohms and mine reads nowt

 

[Banshee]

Very low on power with ecu light on counted the code and banshee just gave me how to read ohms and mine reads nowt

27mm sorry bro, pics here of how to mod a socket for the job :thumb2

 

[solarman216]

Is it Bosch or Zexel? Zexel reads 0 ohms, Rick

 

[Madmark]

Bosch bud

 

[Banshee]

Is it Bosch or Zexel? Zexel reads 0 ohms, Rick

He's Bosch setup Rick :thumb2

 

[Lazy-Ferret]

Amozon, £99 new. I am just ordering one.

Sent from my SM-T705 using Tapatalk

 

[Madmark]

I shall have a look bud

 

[Madmark]

Currently unavailable

 

[Lazy-Ferret]

The Bosch Part numbers to search for are...

"0 432 217 306"
"0432 217 306"
0432217306
"16600 7F406"
"16600 7F407"

And then pop onto Ebay, or local motor factors and ask for a Sealey SX024 Diesel Injector Socket 27mm Thin Wall which is around the £10 mark, so you can take it out and out it back in again.

Tightening Torques
Injection nozzle to engine: : 54 - 64 N ⋅m (5.5 - 6.5 kg-m, 40 - 47 ft-lb) Injection nozzle to tube: : 20 - 25 N ⋅m (2.0 - 2.5 kg-m, 14 - 18 ft-lb)

If removing and returning, you will also need the sealing washer set, which consists of 1 larger cup shaped washer, and a smaller needle seal washer. The Cup shaped washer goes on with the open side of the cup towards the Injector.

Not found the part number or size for those yet though.

 

[Lazy-Ferret]

Currently unavailable

There is still 1 left in stock...

Search on Bosch 0432217306, that will bring it up.

 

[Banshee]

http://www.halfords.com/workshop-to...el-injector-socket-27mm-thin-wall-1-2sq-drive

Going to fetch one of those this week :thumb2

 

[Banshee]

There's the injector
http://www.amazon.co.uk/Bosch-0432217306-Nozzle-Holder-Assy/dp/B0049R4GGO

 

[bry]

I got my socket from ebay,cost around a tenner..

 

[Madmark]

Gonna cut my 27mm socket are these injectors the same throughout the t2 range

 

[Banshee]

Gonna cut my 27mm socket are these injectors the same throughout the t2 range

Yep so pays to have one handy

 

[Madmark]

What I ment was injector will be same and work in any t2 2.7tdi

 

[Banshee]

What I ment was injector will be same and work in any t2 2.7tdi

As far as I'm aware there's only 1 type of Bosch Injector

 

[Bigbunny2007]

Gonna cut my 27mm socket are these injectors the same throughout the t2 range

Only cut out a slot to pass the wire through, you need to keep the socket a full socket or when you try to crack the injector chances are the socket will not be strong enough :thumb2 I borrowed a split socket designed for injector removal and it was too weak!! So I bought a deep socket and milled a slot into it to pass the wire through and it was spot on. Hope this makes sense!