Show me you pod pics

[poppypiesdad]

Hi all i just got

http://cgi.ebay.co.uk/PLASMA-DISPLA...photoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

and

http://cgi.ebay.co.uk/PLASMA-DISPLA...photoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

with a

http://cgi.ebay.co.uk/Double-Gauge-...photoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

and cant find a suitable place for it to fit in properly

so i was thinking

two of these

http://cgi.ebay.co.uk/Single-Pod-Ga...photoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

but dont know so

WHERE HAVE YOU MOUNTED YOURS i want it to fit in a patrol y61

regards

jamie

 

[davemud]

Hi ya jamie

I have this fitted to my patrol 3 gauges Oil Pressure, Boost Pressure, and Exhaust Gas Temperature.
Each gauge gives a voltage reading on start up 1st battery 2nd battery and Ignition circuit
then after 30sec gives its operational reading giving the voltage every 10min.

Work well very necessary if you doing any other mods...

Displays showing voltage, you can just make out the indexing lights round the outside of the display

 

[Deleted Member S]

You can get the ones that fit to the A pilars:augie or if you have a cubby hole in your dash you could make a panel out of MDF & cover it:thumb2

 

[poppypiesdad]

Thanks Dave. That pic has answered my question and i like the look, its hard to pictuere the a pillar pod without the spend
Cheers Sweety the only other place is the blank above the glovebox had a look today and there's a lot of stuff behind and above the glovebox but on the up i did find the pollen filter and it needs changed

jamie