Remote Fob

[clivvy]

Hi guys,

just thinking, is there any alternative to the remote fob for the Terrano? I have the small black fob with two rubber buttons forming a circle. The rubber buttons are rubbish (I have already replaced with new fob from ebay).

When I press the buttons, I either have to dig my fingers in or it randomly works ok - I could be wrong but I get the impression its the rubber not making contact with the micros switch..

anything I can do??

 

[Banshee]

Hi guys,

just thinking, is there any alternative to the remote fob for the Terrano? I have the small black fob with two rubber buttons forming a circle. The rubber buttons are rubbish (I have already replaced with new fob from ebay).

When I press the buttons, I either have to dig my fingers in or it randomly works ok - I could be wrong but I get the impression its the rubber not making contact with the micros switch..

anything I can do??

Have a read of this thread :thumb2
http://www.nissan4x4ownersclub.com/forum/showthread.php?t=20116

I've got one of those now and having no problems with the buttons

If you'd like something that doesn't use rubber buttons try one of these and pair it to the module in the car

http://www.ebay.co.uk/itm/NISSAN-MI...s_SM&fits=Car+Make:Nissan&hash=item19e7a71ec1

Instructions to do it can be found here;
http://www.nissan4x4ownersclub.com/downloads/workshop/wk14.pdf

make sure you get the right frequency though as there are two tyoes, 418MHz and 433MHz, it's 433MHz for the Terrano and Maverick

 

[clivvy]

GOODY!!

thanks for that, I was hoping there would be a solution involving a different type of fob! Ill check the frequency and get one ordered, nice one thanks mate!:thumbs

 

[Banshee]

GOODY!!

thanks for that, I was hoping there would be a solution involving a different type of fob! Ill check the frequency and get one ordered, nice one thanks mate!:thumbs

Remove your steering shroud and the box will be in there with the frequency printed on the white sticker

 

[clivvy]

cheers buddy (I got it from the actual fob circuit board) going on that, the one you listed should work?!

 

[Banshee]

cheers buddy (I got it from the actual fob circuit board) going on that, the one you listed should work?!

It should indeed matey however that one was a bit scabby there are tidier ones on there that one was just an example :thumb2

 

[R1cho]

i'm old school and just put the key in the door :lol

 

[Banshee]

i'm old school and just put the key in the door :lol

:jerkit:

Hahahahahaha sorry I just really wanted to use that icon, I don't mean it really :thumb2

 

[clivvy]

It should indeed matey however that one was a bit scabby there are tidier ones on there that one was just an example :thumb2

yh I found a much better one, still a bit scruffy but looks fine!:thumbs

 

[clivvy]

i'm old school and just put the key in the door :lol

do WHAT

 

[Sweety]

Mine was the same so cut a tiny bit of card & put it between the rubber & the micro switch & it worked great until the micro switch packed in common fault:doh

 

[clivvy]

Banshee....I bought one the same as the link you posted. picked it up this morning and programmed it, works a treat!! Its a plastic remote, so no stupid rubber, problem is SOLVED!

so, thanks for helping me out, I appreciate it, I don't think id have known to look at that particular remote :thumbs