Rear Wiper

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tomas

Well-known member
Joined
Oct 8, 2012
Messages
239
Anyone else have the same niggly problem?
The top edge of my rear door wiper doesn't touch the glass!
I put new Bosch wipers all round, but it hasn't changed the problem.
It's not a Major thing, but it just pisses me off that the top bit doesn't get cleaned!:confused::(:(
 
Anyone else have the same niggly problem?
The top edge of my rear door wiper doesn't touch the glass!
I put new Bosch wipers all round, but it hasn't changed the problem.
It's not a Major thing, but it just pisses me off that the top bit doesn't get cleaned!:confused::(:(
Seems to depend on the make of wiper blade, mine did the same, but I bought a new blade recently from a Spanish motor factor and that one wipes along it's full length.
Possibly the amount of spring in some blades is stronger than others - if too strong the spring in the wiper arm will not depress it fully against the rear screen.
 
same problem here.. and yes it does annoy me too... I have tried a couple of makes, but it still does it.

I wish mine also wiped a bit further across the screen as well.
 
i got some of them flat aero blades, seemed to clean all the bits it should have
 
Mine had a similar issue. I gently bent the metal section that carries the rubber blade to give more of a curve on it and it now wipes all areas. The original shape was too flat.

Richard
 
i couldn't tell u cos i have no rear view mirror so can't look out it & never use it lol
 
i got some of them flat aero blades, seemed to clean all the bits it should have

Yeh! I got the Bosch Aero Wipers, I had a cheaper brand before but they squeaked all the time! Bloody annoying!
 
been looking at that in the rear view mirror for the past couple of weeks. I also have new bosch blades! will give it a little more curve :)
 
I fitted a cheap blade that I got in France and that sorted the problem out, on my last Terry I fitted a Bosch blade and that missed the top of the screen
 
I fitted a cheap blade that I got in France and that sorted the problem out, on my last Terry I fitted a Bosch blade and that missed the top of the screen
Seems like continental ones don't have the problem, your French and my Spanish - sourced blades must be made to a different spec!
 
I got a set of Bosch last year and same thing, shame as the old one tho ripped cleared every bit. I just can't be arsed doing owt with it:nenau
 
got some " champion " wiper blades on mine ....... seem ok
 

Latest posts

Back
Top