pr front wings

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

panelbeater

Well-known member
Club Member
Joined
Dec 20, 2012
Messages
1,640
got a pr of front wings from bay this morning £47.95,1 good 1 slight rust,i just need to paint them my colour and fit.bargain price too no far away.
they are of a mav but look the same as mine.
he has front bull bar too for sq lights.£85.
look for bungie 05 to look if interested.
 
well an update.
picks may follow.
i decided to have a week of off caravanning and get on with the blue t2.
i took front inner arch linings,rubber ones took out front indercaters on bumper and wings used a hammer gun to undo 4 bumper bolts,lifted out bumper and took off both front wings.noticed 4 bolts are 2 and 2,longer ones for top bumper mounts.
outrigger ions shot on both sides in bumper,took 5 hrs making up the shape and welding in.repaired cracks in bumper got ready to paint in primer.
both wings shot so prepared the good replacement wing ready for primer.
other replacement wing i cleaned back to good metal but decided to cut out fully the rot and set about making a replacement section out of a disused tumble dryer,its thicker gauge steel so then welded it in as one piece keeping the original shape to as close as possible.then repaired to final shape and prepared it for priming.
got the wings and bumper primed,3 coats then a guide coat and left overnight to dry.
it was a day of flatting,stopper where needed and re priming.
it was time to repair front cross member took a bit of time shaping and welding but then shut-zed it in. a couple of small welded patches on inner arch to make good.
back to flatting wings and bumper again washed down and left overnight.
n/s/r/d had a bad panel that took a bit of time to repair as did the plastic arch trim.got them ready to prime,stoppered up flatted and re-primed.
time to start spraying in the t2 colours.
painted wings first,good colour match and painted in to blend r/d.2k clear coat to finish.got a bit of dust but will polish it out.next day i masked up the blue door so i could paint silver trim.sprayed and blended in so as not to disturb the 4x4 emblems on panel.
next day was unmask and refit wings and bumper and indercaters,inner and outer arch panels and mud flaps.
it now is strong and looks good,well when the rest is cleaned it will.
just 2 front tyres to change which i have here and jobs a good un.

i have the same jobs to do on my other green t2 but i have plastic wings for that one.
when i have done that one i will be selling one of them.
 
Been busy then.
I do miss the body shop and only proper spraying I do are side jobs since I moved into the industrial coating side of things.
Gives you a great sense of pride when you look at what you have painted:thumb2
 
picks on camera in caravan not with me.took them from start to finish.will post later.going to get green paint today to start all over again.
 
open a reply to thread box then click on the paper clip icon and follow on screen prompts, Rick
 
open a reply to thread box then click on the paper clip icon and follow on screen prompts, Rick

or type your message and scroll down to manage attachments and add them that way. It seems to have changed recently for me , the paperclip has gone:nenau
 

Latest posts

Back
Top