makeitfit
Well-known member
- Joined
- Apr 27, 2008
- Messages
- 15,112
At last I got round to fitting one of the power amps into the mav:sly
There was no room behind my dash 'cause of the air scoop so decided on under the passenger seat.
Took the seat out and basically bolted it to the underside of the seat frame. Had to make up a couple of brackets and drill a few holes and bingo, it's in:thumbs
That's about 10cm off the deck so will be safe from all but ADZ style water driving:lol
Lining up the amp for size
Wiring is zip tied to the loom under the seat and then under center consul to the head unit and LED switch
Then bolted to the frame so there's enough slack in the cables to move the seat back and fore, and a nice bit of heat for navigators bum
I'll get the other one under the driver's seat next:naughty
There was no room behind my dash 'cause of the air scoop so decided on under the passenger seat.
Took the seat out and basically bolted it to the underside of the seat frame. Had to make up a couple of brackets and drill a few holes and bingo, it's in:thumbs
That's about 10cm off the deck so will be safe from all but ADZ style water driving:lol
Lining up the amp for size
Wiring is zip tied to the loom under the seat and then under center consul to the head unit and LED switch
Then bolted to the frame so there's enough slack in the cables to move the seat back and fore, and a nice bit of heat for navigators bum
I'll get the other one under the driver's seat next:naughty