Nuts

[The Patrolman]

Has anyone got a spare set of wheel nuts to fit a Troll.
For some reason the OSR studs are shorter than the rest and the Nuts from my alloys, whilst not ideal, only catch about 2 threads.
I would gladly deal in pound coins if need be.
24 would be good 27 ideal

 

[The Patrolman]

I could always trade some nuts for alloy wheels:thumb2

 

[makeitfit]

Better off just changing those studs, only need to undo the calliper and bingo :thumbs
Studs in motor factors 43mm I think for the trol. OR just get the longer 65mm ones and trim to size

 

[The Patrolman]

Better off just changing those studs, only need to undo the calliper and bingo :thumbs
Studs in motor factors 43mm I think for the trol. OR just get the longer 65mm ones and trim to size

Do you know what the thread size M12 x 1.25 or M12 x 1.5?
Shogun comes up as M12x1.25 £21 for a set of 20

 

[makeitfit]

M12 x 1.25 :thumbs but check the spline size I thought the Nissan base was different to Shogun but not 100%

 

[The Patrolman]

Yeah! 1.25mm that's what I ment. I'm looking at a full set of std open nuts, that way I can keep the nuts that go with the original Alloy wheels when i sell them £1 each inc delivery.
Thanks:thumb2