ironman 2inch lift rear springs lwb

[trucker4x4]

hi to all again. merry christmas. just wondered if the guy who was importing the ironman 2 inch lifted rear springs for lwb terrano 2 could still get them at all? not sure who it was but remember reading a thread during the summer. please reply if you are that person? many thanks in advance. i am currently using 2 inch spacers and standard length heavy duty springs and pro comp shocks at rear. but wanted to get another 2 inch of lift as would fit the lifted springs with the 2 inch spacer in place? or would you recommend just leaving the 2 inch spacers with heavy duty springs that i currently have on and doing a 2 inch body lift instead? in order to get the 4 inches of lift? not sure which way to go. any suggestions please reply woul be a great help. ive just bought some body lift spacers 50mm recommended by a good fellow on here. many thanks in advance for your suggestions . best regards. paul:thumb2:thumb2

 

[makeitfit]

erm do I read that right, you want a +2" spring AND a 2" spacer to get a 4" suspension lift ?
If so DON'T do it, you'll never get the front end to match up and your prop shaft will probably fall out :lol
I think the only place in the UK doing +2" coils for the T2 is blood red racing. Don't think it's specifically LWB though. Best ask them :thumbs

 

[supergnome]

Can't find um. Can you put a link up cos googles not playing

 

[stinka]

hi to all again. merry christmas. just wondered if the guy who was importing the ironman 2 inch lifted rear springs for lwb terrano 2 could still get them at all? not sure who it was but remember reading a thread during the summer. please reply if you are that person? many thanks in advance. i am currently using 2 inch spacers and standard length heavy duty springs and pro comp shocks at rear. but wanted to get another 2 inch of lift as would fit the lifted springs with the 2 inch spacer in place? or would you recommend just leaving the 2 inch spacers with heavy duty springs that i currently have on and doing a 2 inch body lift instead? in order to get the 4 inches of lift? not sure which way to go. any suggestions please reply woul be a great help. ive just bought some body lift spacers 50mm recommended by a good fellow on here. many thanks in advance for your suggestions . best regards. paul:thumb2:thumb2

Westcoast 4x4 import the ironman springs.

Don't bother tho. You can't lift 4" or as makeitfit says you'll not match with front and your prop shaft will die from the extreme angle

I'd leave your spacers and hd springs. You'll not notice any difference by changing to lift springs, there's nowt wrong with spacers in real terms

Do the body lift if you need 4" but only bother if you are going with 33" tyres other wize if on 31" the 2" suspension lift is adequate

 

[makeitfit]

As above but if you want the link https://www.google.co.uk/url?sa=t&r...TcHk5R_7UaV_XzWGusGcA&bvm=bv.1355534169,d.d2k
Sorry I may have been a tad squiffy when I wrote it :augie:lol

 

[trucker4x4]

hi mate. many thanks for your help , yes will just do body lift if need be. thanks so much for your input. very best regards. paul