H233 Rear Axle 10" Brake Shoes for Sale

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Banshee

Moderator
Joined
Jul 24, 2012
Messages
13,516
Hi Guys

Brought x2 sets of brake shoes on clearance and although listed for my vehicle on their listing, they turned out to be for the H233 axles that take the smaller shoes.

I'm not looking at making anything on them, just want my dead money back. They were so cheap because the boxes were damaged and both different brands but good brands at that.

I have one set branded BBS and another set of TRW's which seem to be very good quality and quite expensive when I've looked online.

If anyones interested drop me a PM, £15 a set plus a few quid for postage :thumb2

I'll re box them in sturdier boxes before I send them off

BBS Set
20170813_212450_1024x576.jpg


TRW Set
20170813_212511_1024x576.jpg

20170813_212521_1024x576.jpg
 
Bump?

Come on guys nice cheap couple of sets of shoes there for the earlier finer type axle?

Surely someone is due a swap soon :nenau
 
Hi Banshee
Id be interested in the pads if I have got things the right way round.
The axel these are for is the older type. When I checked mine the diff enters the axel from the front of the car and I have no plate on the backside of the axel. From what I have read this confirms I have the H233. I think :D
 
Hi Banshee
Id be interested in the pads if I have got things the right way round.
The axel these are for is the older type. When I checked mine the diff enters the axel from the front of the car and I have no plate on the backside of the axel. From what I have read this confirms I have the H233. I think :D

You are correct but I have the same axle with the larger brake setup.
 
Hi Banshee
Id be interested in the pads if I have got things the right way round.
The axel these are for is the older type. When I checked mine the diff enters the axel from the front of the car and I have no plate on the backside of the axel. From what I have read this confirms I have the H233. I think :D

That's the one mate, just have a measure of the hubs though, they should be 10" in diameter, if they are, these are your pads :thumb2

You are correct but I have the same axle with the larger brake setup.

As above :thumb2
 

Latest posts

Back
Top