Got myself a new tool...

[Barrbeast]

10 points if you can tell me what it's for ...

 

[Lazy-Ferret]

Is it for holding one of the pully wheels still, or turning it round?

Sent from my GT-I8160 using Tapatalk 2

 

[Barrbeast]

Nope, although you're on the right track thinking 'wheel'

 

[Fez_uk]

It's for adjusting the bearings!!!

 

[Barrbeast]

10 points to Fez :thumbs

Will make keeping the bearings tight much easier as it'll fit on the end of the 1/2" ratchet.

Wasn't much more than a tenner either

 

[elty001]

I made mine for free at work:thumb2:lol:lol

 

[rustic]

I made mine for free at work:thumb2:lol:lol

Two blunt nails in a piece of wood and lever in between, but you can't torque it up to a particular value, but having said that, I don't find that necessary.:thumb2

 

[spinna]

It's for adjusting the bearings!!!

Smart arse:lol

 

[elty001]

Two blunt nails in a piece of wood and lever in between, but you can't torque it up to a particular value, but having said that, I don't find that necessary.:thumb2

Mines the same idea. Two bits of bar welded onto the outside of a bit of tube with a handle for tightening.
Job done. Once I had found the right diameter tube it took all of 5 mins to weld it together :thumb2

 

[Sweety]

I've got the poor man's version a punch & hammer:lol

 

[makeitfit]

Hammer and punch is a bit of an ask on the trol. The bearing nut thing is deep, deep under cover :lol
I have one on my Crimbo list :thumbs

 

[Barrbeast]

Got to admit this made tightening up the bearings a breeze

Of course now I have no excuse for them being slack for any length of time :lol

 

[RJL Services]

tool

where did you aquire the tool from mate:bow

 

[Sweety]

Glad it works well:thumb2 oh the joy's of being able to adjust hub bearings with the wheels on:lol no such joy for me having 17" T2 wheels as no big centre cap

 

[Barrbeast]

Here's the latest listing bud

http://www.ebay.co.uk/itm/Axle-4x4-...61-Navara-D22-1-2-Spanner-Tool-/131364026257?

Price has gone up a wee bit since I got mine but still well worth it! Fast postage as well.

Probably fit the Terrano lock nuts too since they look the same to me :nenau

 

[Barrbeast]

Glad it works well:thumb2 oh the joy's of being able to adjust hub bearings with the wheels on:lol no such joy for me having 17" T2 wheels as no big centre cap

Gotta love those massive Trol hubs! :thumbs:lol

 

[Sweety]

Gotta love those massive Trol hubs! :thumbs:lol

My last T2 had auto hubs so had the big centre caps so you could strip off the auto hub & adjust the bearings with the wheels still on but this on is a slog wheel off & adjust & wheel back on nip up the nuts & check & so on until right can get a little tiring:lol

 

[Barrbeast]

My last T2 had auto hubs so had the big centre caps so you could strip off the auto hub & adjust the bearings with the wheels still on but this on is a slog wheel off & adjust & wheel back on nip up the nuts & check & so on until right can get a little tiring:lol

What a faff! That's what you get for having fancy 17" wheels...:augie

 

[Sweety]

What a faff! That's what you get for having fancy 17" wheels...:augie

It sure is:doh but I really like the wheels so will just have to put up with it:lol