front shock length?

Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

terranosaurusdoug

Well-known member
Joined
Sep 30, 2014
Messages
5,500
Does anyone know the fully extended length of a terrano front shock, and if poss compressed length and diameter?

I've bought two monroe adventure shocks code D5473 very cheaply, however the correct ones are code D5474 and I'm trying to find out what the differences are, busy for a few days or I would just whip mine out and measure it :naughty
 
Does anyone know the fully extended length of a terrano front shock, and if poss compressed length and diameter?

I've bought two monroe adventure shocks code D5473 very cheaply, however the correct ones are code D5474 and I'm trying to find out what the differences are, busy for a few days or I would just whip mine out and measure it :naughty

How cheap is cheap our kid :naughty
 
Just been out and measure one 10" closed 14" extended (bottom bolt C/L to top flange no rubber), Diam 45mm, although the pair I supplied to Banshee were a tad longer, Rick
 
Just been out and measure one 10" closed 14" extended (bottom bolt C/L to top flange no rubber), Diam 45mm, although the pair I supplied to Banshee were a tad longer, Rick

:D you the man Rick, thank you :thumb2

What do you reckon, dia is 50mm, length compressed is 10" from cen of bolt hole to shoulder.

20160615_223927.jpg
 
How cheap is cheap our kid :naughty

Ten whole pounds bud :D the bloke wasn't sure what they were off and I said I'd buy them if they were cheap enough, I went to buy a smaller towbar for mine and I asked him if he had any other bits, I got a brake light too which I have been after for flippin ages :D :thumb2

20160615_190916.jpg
 
:D you the man Rick, thank you :thumb2

What do you reckon, dia is 50mm, length compressed is 10" from cen of bolt hole to shoulder.

View attachment 7880

They will fit no problem, the yellow ones Banshee removed were 50 mm and longer, you only need longer if you have more droop than standard by removing the top bump stops, Rick
 

Latest posts

Back
Top