front hub washers

[trucker4x4]

a big hi to all members. can anyone help me please. looking for the front hub washers [both n/side and o/side for 97 terrano 2 tdi. as my washers are in pieces and cannot dismantle my hubs to change discs and pads and do c.v gaitor due to not being able to reasemble the hubs etc with the nackered washers. also as well as needing front hub washers, need some good rear drums and axle brake adjuster bar with teeth in good shape and full set of retainer springs for rear brake shoes. if anyone is breaking a terrano and or can help with any of the parts would be most grateful. cash waiting. many thanks. paul

 

[R1cho]

have you tried milners? http://www.milneroffroad.com/nissan/terrano/r20-2-7td-1993-1999-maverick-1993-terrano :thumb2

 

[jims-terrano]

Can you explain a little more about the hub washers? although there are some washers of varying types behind the circlips the normal items to go in the hubs are what's called Brake Rings. These are straight inside the locking hub when you remove it and should have two lugs on them. Theres loads of posts about front hubs and even links to the online manual which will show an exploded view of the hubs.

Jim

 

[solarman216]

do not bother looking for rear brake adjuster bar with good teeth, even when new the system never worked, you just need to remove your drums when the HB is coming up too high and readjust till you can just get the drums on and as an add to that if you look at the back plate to the rear where the HB lever is you will see a plastic button with the HB off there should be only a mm or so of movement if you press this in if it goes a lot more then the HB cable has been adjusted up far too much, Rick

 

[trucker4x4]

a big thankyou

hi to you all. thanks richo, jim, and solarman for your help. will get the front end sorted now. just ordered front wheel spacers and doing another torsion bar lift soon to get another 2 inch on top of 3 inches lift already got so should be even better. and rear came up nice and high with 2 inch spacers and springs. will post some pics soon. thanks again for your help. best regards. paul:thumbs