Front Anti roll bar drop links

[Dartmoor_Lad]

I am changing my drop links over the next couple of days, read through the guide on how to do it, all seems straight forward though is there a torque setting for the nuts? Don't want to tighten them to much and squash the rubber bushes but don't want them too loose either lol.

 

[solarman216]

I am changing my drop links over the next couple of days, read through the guide on how to do it, all seems straight forward though is there a torque setting for the nuts? Don't want to tighten them to much and squash the rubber bushes but don't want them too loose either lol.

you do them up to the end of the thread, Rick

 

[Banshee]

you do them up to the end of the thread, Rick

Sounds sensible suggestion :lol

 

[firebobby]

Jim, remember to give the old threads a dose of WD40 and you will need am Allan key to stop the top joint turning as you undo the nut, I also removed the rubber bump stop for more space

 

[Dartmoor_Lad]

Jim, remember to give the old threads a dose of WD40 and you will need am Allan key to stop the top joint turning as you undo the nut, I also removed the rubber bump stop for more space

Yeah been spraying them for couple of days while waiting for the new ones to arrive.


Sent from my iPhone 5 using Tapatalk

 

[Fez_uk]

if they don't undo it's easier to cut the drop links with a hacksaw then remove the whole arb and cut the rest of the drop links off.

 

[Dartmoor_Lad]

Good idea, hopefully they will be well soaked by now and come off easily.


Sent from my iPhone 5 using Tapatalk