driving lights / fog lights

[darryl]

hi can anyone tell me the best way 2 get them out they need changing thanks darryl

 

[clivvy]

if you mean the whole units, you have to remove the front grille first. open bonnet, squeeze in the 4 clips you can see from the top, and two either side at the bottom. Its a bit tricky, but you can use a screw driver to carefully turn the little thingy that goes between the clips...youll see if you look. Then, a similar situation for the lamps apart from the screws holding it in...

 

[96terrano]

Is you're maverick fitted with square or round headlights. ?

 

[darryl]

thanks clivvy they have not worked since i had the car so time to sort them out:thumb2

 

[darryl]

Is you're maverick fitted with square or round headlights. ?

square ones mate

 

[96terrano]

Ok, well on the square headlight types, the headlight is held in with x3 10mm nuts, 2 behind the grill and one on the top on the light, the spotlights in the bumper are held in with 2 screws:thumb2

Hope that helps.

 

[darryl]

Ok, well on the square headlight types, the headlight is held in with x3 10mm nuts, 2 behind the grill and one on the top on the light, the spotlights in the bumper are held in with 2 screws:thumb2

Hope that helps.

thanks mate sorted

 

[96terrano]

thanks mate sorted

:thumb2:thumb2