Does this look lifted?

[Swiper]

I was looking at doing the cheap lift. While looking at the pics on the guide, my t2 looks as high now.
Looking at the torsion adjuster bolts, they are all the way up but not sure about the rear?
What do you think?

 

[stinka]

I'd say not, as U have standard wheels and tyres

Mine are 31"

 

[Swiper]

I'd say not, as U have standard wheels and tyres

Mine are 31"

Ah! That explains it a bit. Have you done a body lift too? What size are your wheels/tyres. I realise 31" but what size does it say on them? Did they require any work to fit them?
Cheers.

 

[puddle hoppers inc.]

my standard height, from floor to very bottom of wheel arch, with standard tyres is around the 945mm mark. hope this helps.

 

[stinka]

Ah! That explains it a bit. Have you done a body lift too? What size are your wheels/tyres. I realise 31" but what size does it say on them? Did they require any work to fit them?
Cheers.

No bl, tyres say 31 10.5 15, they fit as stock, but remove front mudflaps, get grinder out and hammer seam flat

But, if you offroad you'll need 2" lift as they catch every where during articulation

 

[HMLyder]

No bl, tyres say 31 10.5 15, they fit as stock, but remove front mudflaps, get grinder out and hammer seam flat

But, if you offroad you'll need 2" lift as they catch every where during articulation

What rims size you got for the 31x10,5
Width and offset?

 

[4x4onarret]

my standard height, from floor to very bottom of wheel arch, with standard tyres is around the 945mm mark. hope this helps.

The bottom of your wheelarch is over 3ft from the ground! WOW

That is some sort of lift.......unless I am reading this wrong.

I had 31 10.5 R15 on my previous Terrano, they fitted std 15x7" rims ok, had to trim the mud flap and front inner bumper but that was it.

 

[puddle hoppers inc.]

The bottom of your wheelarch is over 3ft from the ground! WOW

That is some sort of lift.......unless I am reading this wrong.

I had 31 10.5 R15 on my previous Terrano, they fitted std 15x7" rims ok, had to trim the mud flap and front inner bumper but that was it.

yikes, you are right..... measured from floor to centre of wheel arch
3ft to bottom of wheel arches would be a bit

 

[stinka]

What rims size you got for the 31x10,5
Width and offset?

7x15

-25 offset