Clutch arm broken

[4x4onarret]

Hi All,

Not been here for a while as my Terrano has been working without fault.......Until the last few days.
I have had trouble selecting gears, until today on the way home pedal went to the floor.
No fluid loss so I bled the system and pumped the pedal, bad move. Pumped the rod out the end of the slave cylinder.
Removed the cylinder, looked into the gearbox via the arm hole and notice the pivot ball has gone through the arm.
There lies the problem. So I need a new slave cylinder and clutch arm.
The cylinder is not an issue but does anyone know where I can get a clutch arm from?

Many thanks in advance.

Steve.

 

[briggie]

Hi All,

Not been here for a while as my Terrano has been working without fault.......Until the last few days.
I have had trouble selecting gears, until today on the way home pedal went to the floor.
No fluid loss so I bled the system and pumped the pedal, bad move. Pumped the rod out the end of the slave cylinder.
Removed the cylinder, looked into the gearbox via the arm hole and notice the pivot ball has gone through the arm.
There lies the problem. So I need a new slave cylinder and clutch arm.
The cylinder is not an issue but does anyone know where I can get a clutch arm from?

Many thanks in advance.

Steve.

cnc fabs , adz, solarman 216 ..... to name a few members

 

[cncfabs]

Hi All,

Not been here for a while as my Terrano has been working without fault.......Until the last few days.
I have had trouble selecting gears, until today on the way home pedal went to the floor.
No fluid loss so I bled the system and pumped the pedal, bad move. Pumped the rod out the end of the slave cylinder.
Removed the cylinder, looked into the gearbox via the arm hole and notice the pivot ball has gone through the arm.
There lies the problem. So I need a new slave cylinder and clutch arm.
The cylinder is not an issue but does anyone know where I can get a clutch arm from?

Many thanks in advance.

Steve.

Have good clutch arm and cylinder if required