Body lift in workshop downloads

[Paul]

As this like others as gone as anyone got it to send to us?
Looking at getting one from the link Zippy656 posted,
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=270335954827

only thing I can't get into my head is I am sure in the download they removed loads of bit's where in the ebay add they say..

"
FITTING INSTRUCTIONS ARE SUPPLIED WITH THE KIT WHICH CAN BE FITTED WITHOUT ANY MODIFICATIONS."

 

[Darwin]

Can I have an ''up north'' to ''down south'' translation please becuase I didnt understand a word of that. :nenau

 

[Terranosaurus]

You need to make new bumper mounts, extend the fuel filler and breather pipes, do something with the rad as it won't line up with fan anymore. Slacken all wires to allow slack for em to move, they're long enough but need slack pulling. Slacken steering column on splines to allow it to move there mat be more but I don't remember right now.

That appears to be a generic kit that they sell - I do wonder 2 things, 1 have they got the correct bolts, 2 Have they sold any, as no one on here seems to have bought a kit.

 

[Darwin]

You need to make new bumper mounts, extend the fuel filler and breather pipes, do something with the rad as it won't line up with fan anymore. Slacken all wires to allow slack for em to move, they're long enough but need slack pulling. Slacken steering column on splines to allow it to move there mat be more but I don't remember right now.

That appears to be a generic kit that they sell - I do wonder 2 things, 1 have they got the correct bolts, 2 Have they sold any, as no one on here seems to have bought a kit.

all i could think of as its such a small lift perhaps there is enough stretch in everything to get it done ok ?

 

[Paul]

Can I have an ''up north'' to ''down south'' translation please becuase I didnt understand a word of that. :nenau

ok, For the Southerners out there..

In the old days in the workshop downloads, we had a download showing a T2 Getting a body lift kit fitted, now it like some other downloads have been lost.

My question is if anyone as downloaded it can send it to me.

 

[Paul]

all i could think of as its such a small lift perhaps there is enough stretch in everything to get it done ok ?

Remember they had to remove bit's & adapt things to make them fit back, 1 & half inches is alot when you think what is bolted to the body

 

[Terranosaurus]

I did 60mm on my old mav as per the old download and only had to do the stuff in the above post that I can rememeber.

 

[Paul]

You need to make new bumper mounts, extend the fuel filler and breather pipes, do something with the rad as it won't line up with fan anymore. Slacken all wires to allow slack for em to move, they're long enough but need slack pulling. Slacken steering column on splines to allow it to move there mat be more but I don't remember right now.

That appears to be a generic kit that they sell - I do wonder 2 things, 1 have they got the correct bolts, 2 Have they sold any, as no one on here seems to have bought a kit.

Thanks, 2 have got them but no feedback as of yet.
Sent them emails with questions but no reply.:nenau