A few recent jobs in prep for MOT

[Banshee]

Boy oh Boy have some of these been a nightmare James (terranobreakersshropshire) is fully aware of all of them as most of them have required me fetching parts off him to repair them lol

New starter motor cable fitted using a jump lead cable attached to the starter using a new ring terminal and then a ring terminal onto the battery replacing this piece of junk that has been hanging on using insulation tape since I've owned the car

New Upper and Lower Ball Joint and CV Boot, resulting in me needing a new hub because everything was seized and in anger I brought out the angle grinder (thanks james)

New wing sprayed and snorkel fitted

Just need to re-attach the plastic trim cover now with some bodywork adhesive as I don't want to drill holes into the wing again as that will just inhibit rot again and that wing is very very tidy and thats the way I want it to stay

Just need to fit two new Tie Rod Ends and get the car tracked before I get these bad boys fitted to the front of the car that I picked up with 12mm of tread at £110 for the two :thumbs

 

[96terrano]

How much was the snorkel? And how dit you fit it to the air box

 

[puddle hoppers inc.]

good work banshee! those upper ball joints can be greased if you remove the square bolt from the top of it. ditto 96, snorkel, standard navara one? routing etc.. nice one :thumb2

 

[Banshee]

How much was the snorkel? And how dit you fit it to the air box

Well I was given a supposedly knackered Husqvarna Petrol Chainsaw for nothing that was a non runner and I fixed it and didn't really need it so I advertsied it locally by me and sold it for £70 and then saw this come up on ebay at like £90 or something I think

I let the listing end and then messaged the guy to ask if he still had it and what would he take for it, I then got him down to £60 and took a drive down one of the weekends to Bath with the girlfriend and fetched it

Came with the blue Samco hose and all the clips and bolts etc

I just binned off the plastic collar that slots onto the front of the airbox and attached the hose straight to that, drilled through the wing with a disc cutter but didn't realise it was too small as the pipe tapered out at the end so I had to step drill it out and make the best of a bad job lol, don't really mind as you don't see the hole behind the snorkel