Media added by DeeTees

Navigation

Browse albums
Nissan 4x4 Owners Club Forum

Help Support Nissan 4x4 Owners Club Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
1. Eggfoam in situ, I used twice as much, to be sure.

1. Eggfoam in situ, I used twice as much, to be sure.

  • 0
  • 0
2. More sound deadening, For 4 doors -1x10m roll of Flashband ,1 large sheet of barely flexible bituminous material applied in strips on flat panel b

2. More sound deadening, For 4 doors -1x10m roll of Flashband ,1 large sheet of barely flexible bituminous material applied in strips on flat panel b

  • 0
  • 0
3. One way to make a frame, called the shotgun approach

3. One way to make a frame, called the shotgun approach

  • 0
  • 0
4. Here's the sensible way

4. Here's the sensible way

  • 0
  • 0
5 The first one (1.2mm thick, 125mm diam hole) goes onto the metal, sorta permafixed. The second, 2cm, 145mm diam hole takes the speaker

5 The first one (1.2mm thick, 125mm diam hole) goes onto the metal, sorta permafixed. The second, 2cm, 145mm diam hole takes the speaker

  • 0
  • 0
6. Inner plate in place, max size allowed before it would interfere with interior panel, it will also mainly support the grill.

6. Inner plate in place, max size allowed before it would interfere with interior panel, it will also mainly support the grill.

  • 0
  • 0
7. Inner panel work included some hard wood glued to inside of screw holes to support grill/mapholder if needed but hardly

7. Inner panel work included some hard wood glued to inside of screw holes to support grill/mapholder if needed but hardly

  • 0
  • 0
8. Speaker in place

8. Speaker in place

  • 0
  • 0
9. OOpps, 3cm!!

9. OOpps, 3cm!!

  • 0
  • 0
10. Crossover drivers side places under steering wheel

10. Crossover drivers side places under steering wheel

  • 0
  • 0
11. Stainless screws visible Shoulda used black ??. It can be removed easily and replaced, once you have the 4 holes lined up.

11. Stainless screws visible Shoulda used black ??. It can be removed easily and replaced, once you have the 4 holes lined up.

  • 0
  • 0
12. The only tweeting I do

12. The only tweeting I do

  • 0
  • 0
13. Amp in the glove compartment area, Crossover dangling on the floor, I have a plan somewhere to hide this.

13. Amp in the glove compartment area, Crossover dangling on the floor, I have a plan somewhere to hide this.

  • 0
  • 0
14. Grill back in place

14. Grill back in place

  • 0
  • 0
15. Stainless torx used, this part can be done much more tidy

15. Stainless torx used, this part can be done much more tidy

  • 0
  • 0
16. Doesn't it look kinda mystical

16. Doesn't it look kinda mystical

  • 0
  • 0
17. But this is what I will be doing, a wild departure from stock

17. But this is what I will be doing, a wild departure from stock

  • 0
  • 0
18. Ahh, the elephant in the back, the sub.

18. Ahh, the elephant in the back, the sub.

  • 0
  • 0
19. And the mess in the front, now thinly disguised

19. And the mess in the front, now thinly disguised

  • 0
  • 0
Back
Top