cheap code readers

Madmark · 09-02-2016, 16:45

Any one bought and used one if so can you put link up to ones you use

Banshee · 09-02-2016, 16:50

Quote:

Originally Posted by Madmark

Any one bought and used one if so can you put link up to ones you use

Good luck with the 16 pin setup

I've tried and failed several times, i don't know enough about Consult to do it alone

Madmark · 09-02-2016, 16:52

I was thinking more along the lines of the small hand held basic ones that read codes beginning with p. Rather than the paper clip idea as still cant sort this injector prob so gonna buy new injector to rule that out

bry · 09-02-2016, 19:42

A couple of years back i purchased a Autophix one from a company called Chinavasion.Yes the company is in China.

Madmark · 09-02-2016, 19:51

did it work tho

bry · 09-02-2016, 20:46

Yeah it did the job on my 2001 truck

Banshee · 10-02-2016, 10:36

Quote:

Originally Posted by bry

Yeah it did the job on my 2001 truck

Is that a 16 Pin Consult or a 14 Pin?

If it's the 16 Pin can you check if you have Pin 7 present please

bry · 10-02-2016, 13:35

No longer have that truck Banshee,sorry mate.

Banshee · 10-02-2016, 13:44

Quote:

Originally Posted by bry

No longer have that truck Banshee,sorry mate.

No worries buddy

Mark take a pic of your Consult plug mate and wires on back, should juts slide out of groove as if yours doesn't have Pin 7 you can mod a 14 Pin reader and still use ECUTalk

Banshee · 10-02-2016, 15:29

Does yours look like that Mark?

Madmark · 10-02-2016, 15:34

Yes mate exactly same and same pins too

Banshee · 10-02-2016, 16:36

Quote:

Originally Posted by Madmark

Yes mate exactly same and same pins too

So Consult is a no go for you too then

arcascomp · 11-02-2016, 13:36

That's OBDII - standard cheap as chips bluetooth reader from ebay or Amazon and Torque lite on your android phone. Codes will get read fine.

If you manage to get a v1.5 (I think that's the correct version) rather than the common v2.1 OBDII bluetooth dongle thing then NDS Scan Lite should work too. The one I had was v2.1 and NDS didn't like it, but Darren managed to get a code from it using Torque Lite.

Banshee · 11-02-2016, 13:42

Quote:

Originally Posted by arcascomp

That's OBDII - standard cheap as chips bluetooth reader from ebay or Amazon and Torque lite on your android phone. Codes will get read fine.

If you manage to get a v1.5 (I think that's the correct version) rather than the common v2.1 OBDII bluetooth dongle thing then NDS Scan Lite should work too. The one I had was v2.1 and NDS didn't like it, but Darren managed to get a code from it using Torque Lite.

Awesome Info!!!!!

I'm going to try one of these, what do you think?

http://www.ebay.co.uk/itm/Bluetooth-...gAAOSw9N1VwHO8

Banshee · 11-02-2016, 13:48

We're good to get that one by the looks of it

http://torque-bhp.com/wiki/Bluetooth_Adapters

But no support in the Lite version of Torque, so you'll have to spend another £2.95 on the pro version of the app

All said and done though, if this works, £7.70 is a bargain

Might be making some headway with the guys that appear to be ODB2 then

I'll kick my other thread back into life once it comes and has been tested

09-02-2016, 16:45	#1
Madmark Senior Member Join Date: Aug 2014 Location: Dorset Vehicle: highly modded Terrano 2 Posts: 1,088	cheap code readers Any one bought and used one if so can you put link up to ones you use

10-02-2016, 15:29	#10
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	Does yours look like that Mark? __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!! Last edited by Banshee; 21-07-2017 at 09:44.

11-02-2016, 13:48	#15
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	We're good to get that one by the looks of it http://torque-bhp.com/wiki/Bluetooth_Adapters But no support in the Lite version of Torque, so you'll have to spend another £2.95 on the pro version of the app All said and done though, if this works, £7.70 is a bargain Might be making some headway with the guys that appear to be ODB2 then I'll kick my other thread back into life once it comes and has been tested __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

09-02-2016, 16:52	#3
Madmark Senior Member Join Date: Aug 2014 Location: Dorset Vehicle: highly modded Terrano 2 Posts: 1,088	I was thinking more along the lines of the small hand held basic ones that read codes beginning with p. Rather than the paper clip idea as still cant sort this injector prob so gonna buy new injector to rule that out

09-02-2016, 19:42	#4
bry Senior Member Join Date: May 2013 Location: South Yorkshire.. Vehicle: Nissan Terrano MK 2 SE Posts: 1,757	A couple of years back i purchased a Autophix one from a company called Chinavasion.Yes the company is in China.

09-02-2016, 19:51	#5
Madmark Senior Member Join Date: Aug 2014 Location: Dorset Vehicle: highly modded Terrano 2 Posts: 1,088	did it work tho

09-02-2016, 20:46	#6
bry Senior Member Join Date: May 2013 Location: South Yorkshire.. Vehicle: Nissan Terrano MK 2 SE Posts: 1,757	Yeah it did the job on my 2001 truck

10-02-2016, 13:35	#8
bry Senior Member Join Date: May 2013 Location: South Yorkshire.. Vehicle: Nissan Terrano MK 2 SE Posts: 1,757	No longer have that truck Banshee,sorry mate.

10-02-2016, 15:34	#11
Madmark Senior Member Join Date: Aug 2014 Location: Dorset Vehicle: highly modded Terrano 2 Posts: 1,088	Yes mate exactly same and same pins too

11-02-2016, 13:36	#13
arcascomp Senior Member Join Date: Jan 2012 Location: Edinburgh, Scotland Vehicle: 96 Mitsubishi Challenger! Posts: 775	That's OBDII - standard cheap as chips bluetooth reader from ebay or Amazon and Torque lite on your android phone. Codes will get read fine. If you manage to get a v1.5 (I think that's the correct version) rather than the common v2.1 OBDII bluetooth dongle thing then NDS Scan Lite should work too. The one I had was v2.1 and NDS didn't like it, but Darren managed to get a code from it using Torque Lite.