Parts for Terrano II

[Koops]

Hi people,

December 2014 I bought my Terrano in Germany, drove the whole way from Passau to my home in The Netherlands with it (although brakes were hardly functioning...). Didn't realise the many problems I had bought too. Since then, car is in my yard, not allowed on public road because it will not be approved in its current condition. I never did a car restoration before but am trying this one, otherwise I may never have such a great car again. So I did a workshop welding, bought some welding tools - I do the best I can. But time is short, for in two months my house will be demolished - car must be up and running then... Right now all pieces are still apart, the frame is off, engine is hold in it's place by chains and ropes only, drive trains are off, lot of work to do... Please tell me were to go for affordable new pieces like bolts (the special ones) and rubbers? Many thanks for your suggestions!

[AlexD333]

Originally Posted by Koops

Hi people,

December 2014 I bought my Terrano in Germany, drove the whole way from Passau to my home in The Netherlands with it (although brakes were hardly functioning...). Didn't realise the many problems I had bought too. Since then, car is in my yard, not allowed on public road because it will not be approved in its current condition. I never did a car restoration before but am trying this one, otherwise I may never have such a great car again. So I did a workshop welding, bought some welding tools - I do the best I can. But time is short, for in two months my house will be demolished - car must be up and running then... Right now all pieces are still apart, the frame is off, engine is hold in it's place by chains and ropes only, drive trains are off, lot of work to do... Please tell me were to go for affordable new pieces like bolts (the special ones) and rubbers? Many thanks for your suggestions!

Hi, Milners offroad should be able to help for much

[solarman216]

For simple items like bolts (special) give me a shout with good description of what they are, by the way welcome mate, Rick

[melissachels]

Welcome
Milners is good, Rick has many years experience with these motors & I'm doing a rebuild myself (very slow one) I'll help where I can. Lots of the guys on here know their stuff & will help if they can

Sent from my HTC One M8s using Tapatalk

[perelaar]

Milner's offroad! But do check eBay as well, I had some bargains there.

I'm located in Belgium by the way, en ik spreek Nederlands, als je ooit vragen hebt

Imported my T2 from The Netherlands.

[Banshee]

Originally Posted by Koops

Hi people,

December 2014 I bought my Terrano in Germany, drove the whole way from Passau to my home in The Netherlands with it (although brakes were hardly functioning...). Didn't realise the many problems I had bought too. Since then, car is in my yard, not allowed on public road because it will not be approved in its current condition. I never did a car restoration before but am trying this one, otherwise I may never have such a great car again. So I did a workshop welding, bought some welding tools - I do the best I can. But time is short, for in two months my house will be demolished - car must be up and running then... Right now all pieces are still apart, the frame is off, engine is hold in it's place by chains and ropes only, drive trains are off, lot of work to do... Please tell me were to go for affordable new pieces like bolts (the special ones) and rubbers? Many thanks for your suggestions!

Welcome Koops, you sound like an interesting guy!!!! Man after my own heart, whats the story with the house

I'm you're friendly forum moderator, if you have any issues mate give me a shout, as the guys have said, Milner Off Road, they specialise in Japanese 4x4 spares, they are based here in the UK but do post abroad and also as a full member of the forum you will also get club discount on your orders with them http://www.milneroffroad.com/nissan/...1993-terrano-1

If you want to be signed up for the discount please add your name to this page and follow the instructions;
http://www.nissan4x4ownersclub.com/f...ghlight=milner

If Milner can't help you, give Rick a shout, in fact just shout on here as we all have bits and bobs lying around

Good luck with it all and please post back with lots of pictures and write ups of your progress/failure, they make for good reading

Link to mine is in my sig below

[Koops]

Originally Posted by perelaar

Milner's offroad! But do check eBay as well, I had some bargains there.

I'm located in Belgium by the way, en ik spreek Nederlands, als je ooit vragen hebt

Imported my T2 from The Netherlands.

Dat zal zeker makkelijk zijn Perelaar, om ook eens iets in 't Nederlands te kunnen overleggen! Dank voor de reactie!

[Banshee]

Originally Posted by Koops

Dat zal zeker makkelijk zijn Perelaar, om ook eens iets in 't Nederlands te kunnen overleggen! Dank voor de reactie!

zijn er nog een paar die u zult verrast spreken de taal

[Koops]

Originally Posted by solarman216

For simple items like bolts (special) give me a shout with good description of what they are, by the way welcome mate, Rick

Thanks Rick and all of you for the wellcome. I have now contacted Millner's, first of all for a new (but standard) body suspension kit (they have that) and I am still waiting for their answer if they can provide a new pair of lower link spindles with bushings (those spindles that continue directly into the torsion spring bars) as well. When I depieced my car during the past months I rapidly discovered that only 4 out of 10 body suspension bolts did actually hold the car. And to be able to depiece the front axle I had to saw those spindles with bushings away, there was no other way to get the spindle out of their bushings. Sawing was awfull by the way - but now I will have to replace them.

[Koops]

Originally Posted by Banshee

zijn er nog een paar die u zult verrast spreken de taal

Very good - but I believe this must be a Google Translation...?

[Banshee]

Originally Posted by Koops

Very good - but I believe this must be a Google Translation...?

Busted

[jims-terrano]

Welcome aboard and as said loads of people with advice. Theres how to guides in the downloads section within quick links. Even a link to a workshop manual in there too.

Just about to get my restoration project back on the road, won't be finished but should be road legal in a week. Check out the link in my signature to my project.

Good luck with your restoration

[perelaar]

Banshee, you almost sound like the current king of Belgium

[Banshee]

Originally Posted by perelaar

Banshee, you almost sound like the current king of Belgium

[solarman216]

Koops re those bits that to had to saw through, I guess you mean the front drop links (ball joint at the top and very short downward facing bolt goes through the bottom wish bone, do not think you mean the torsion bars as you cannot saw these, Rick