2.8 Y60 auto gearbox

matstar89 · 03-02-2013, 11:20

Hi all, 1st time on here in a while, am currently sourcing all the bits I need to turn my sorry looking terrano into a winch challenge truck.
I'm on the hunt for a y60patrol auto gearbox, it's got to be from the 2.8 engine. I've had no luck so far! :0( I'm not in a massive rush as I have quite a big shopping list at the moment!
Cheers matt

stinka · 03-02-2013, 11:41

Will a patrol box fit then mate ?

What mods are u doing ?

Sounds like an interesting project !

stinka · 03-02-2013, 11:46

Patrol gear box so front diff drops correct side then solid patrol axle up front ?

matstar89 · 04-02-2013, 00:56

I already have a pair of yota axles, the patrol gearbox as I'm sure you'll know mates to the rb25det skyline block...... The skylines gearbox is often upgraded to that of a 300zx, the only thing that is required is to change bell housings over. (It's the same gearbox but just built stronger)
But this means that with a patrol box, I can mate it to the 300zx vg30dett block which is a 3.0l twin turbo pushing out 300bhp. And easy to come by.
I can do all of this with the manual box as well but would prefer to stay auto.
The axles will be upgraded with trail gear shafts and cv's which offer a lifetime warranty with no restriction on engine power or wheel size, I'll be using 3 link suspension with panard rods all linked with creeper joints, and front and back diff locks.
I've acquired a lot of the parts needed, just need to get hold of the final difficult to find parts before I break the bank ordering bits from the USA.

makeitfit · 04-02-2013, 02:00

I've now got the horn big time

ffs hurry up and find the bits and get cracking boyo, I wanna see it

96terrano · 04-02-2013, 02:30

Yes, this sounds like porn

very interesting project, sounds like you've got it mostly planned out

stinka · 04-02-2013, 09:06

Quote:

Originally Posted by matstar89

I already have a pair of yota axles, the patrol gearbox as I'm sure you'll know mates to the rb25det skyline block...... The skylines gearbox is often upgraded to that of a 300zx, the only thing that is required is to change bell housings over. (It's the same gearbox but just built stronger)
But this means that with a patrol box, I can mate it to the 300zx vg30dett block which is a 3.0l twin turbo pushing out 300bhp. And easy to come by.
I can do all of this with the manual box as well but would prefer to stay auto.
The axles will be upgraded with trail gear shafts and cv's which offer a lifetime warranty with no restriction on engine power or wheel size, I'll be using 3 link suspension with panard rods all linked with creeper joints, and front and back diff locks.
I've acquired a lot of the parts needed, just need to get hold of the final difficult to find parts before I break the bank ordering bits from the USA.

WOW

Can't wait for pics !

matstar89 · 04-02-2013, 11:01

Yeah a good mate of mine is 3/4 of the way through a jimny build with the Lexus 4.0l v8 lump, I've stolen his suspension set up and got a lot of ideas as he's been doing it, just had to get my house finished before the wife will let me play! Lol! The plan may change slightly along the way as I encounter problems but I want a strong truck with a big revvy petrol! :0)

Fez_uk · 04-02-2013, 12:23

is this going to be a road legal beast or?

matstar89 · 04-02-2013, 20:10

Hoping so, my mate has made some enquiries regarding iva testing and has been told that he can weld too the chassis but not take anything away from it, but trying to get a straight answer is very difficult, I will see how my mate gets on with getting his legal first!! But it has to be road legal as a lot of winch challenge events require driving between stages.

stinka · 04-02-2013, 21:01

That bit about welding too/not cutting away ... To add the solid axle up front u have to remove all the front suspension mounting gubbins and that's all welded to chassis, so how would that fair

Fez_uk · 04-02-2013, 21:10

I guess it's just a mount, it's when you start cutting away the chassis.

matstar89 · 05-02-2013, 22:52

I'm not 100% sure, will have to look deeper into it when the time comes, but everything around iva's seem a bit grey, don't want to open a can of worms but nobody would blinks an eye when you see landies with shortened chassis' and winch bumpers welded in place?! But trying to get a straight answer or anything in writing is a nightmare, seems the people enforcing and regulating these rules don't even know them!! Haha! Keep getting directed to the .gov website which is a nightmare to pull any info from and contradicts itself all over the place!
Anyway that's my rant over with for the night!
Anyone found me a gearbox yet? :0))

matstar89 · 23-02-2013, 21:45

Anyone got or know of a terrano auto box up for grabs? Thinking of trying to get a terrano box to mate to the vg block as finding a patrol box is near impossible. Really want to keep this project auto if possible, cheers matt

96terrano · 23-02-2013, 22:07

Quote:

Originally Posted by matstar89

Anyone got or know of a terrano auto box up for grabs? Thinking of trying to get a terrano box to mate to the vg block as finding a patrol box is near impossible. Really want to keep this project auto if possible, cheers matt

think Steve 'R1cho' has one

03-02-2013, 11:20	#1
matstar89 Member Join Date: Dec 2010 Location: north devon Vehicle: nissan terrano Posts: 62	2.8 Y60 auto gearbox Hi all, 1st time on here in a while, am currently sourcing all the bits I need to turn my sorry looking terrano into a winch challenge truck. I'm on the hunt for a y60patrol auto gearbox, it's got to be from the 2.8 engine. I've had no luck so far! :0( I'm not in a massive rush as I have quite a big shopping list at the moment! Cheers matt

03-02-2013, 11:41	#2
stinka Senior Member Join Date: Feb 2012 Location: Staffs Vehicle: '02 Terrano TDI sport lwb Posts: 3,787	Will a patrol box fit then mate ? What mods are u doing ? Sounds like an interesting project !

03-02-2013, 11:46	#3
stinka Senior Member Join Date: Feb 2012 Location: Staffs Vehicle: '02 Terrano TDI sport lwb Posts: 3,787	Patrol gear box so front diff drops correct side then solid patrol axle up front ?

04-02-2013, 00:56	#4
matstar89 Member Join Date: Dec 2010 Location: north devon Vehicle: nissan terrano Posts: 62	I already have a pair of yota axles, the patrol gearbox as I'm sure you'll know mates to the rb25det skyline block...... The skylines gearbox is often upgraded to that of a 300zx, the only thing that is required is to change bell housings over. (It's the same gearbox but just built stronger) But this means that with a patrol box, I can mate it to the 300zx vg30dett block which is a 3.0l twin turbo pushing out 300bhp. And easy to come by. I can do all of this with the manual box as well but would prefer to stay auto. The axles will be upgraded with trail gear shafts and cv's which offer a lifetime warranty with no restriction on engine power or wheel size, I'll be using 3 link suspension with panard rods all linked with creeper joints, and front and back diff locks. I've acquired a lot of the parts needed, just need to get hold of the final difficult to find parts before I break the bank ordering bits from the USA.

04-02-2013, 02:00	#5
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	I've now got the horn big time ffs hurry up and find the bits and get cracking boyo, I wanna see it

04-02-2013, 02:30	#6
96terrano Senior Member Join Date: Jun 2010 Location: Dumfries and Galloway, Scotland Vehicle: Nissan Terrano 2.7TD LWB Posts: 8,024	Yes, this sounds like porn very interesting project, sounds like you've got it mostly planned out

04-02-2013, 11:01	#8
matstar89 Member Join Date: Dec 2010 Location: north devon Vehicle: nissan terrano Posts: 62	Yeah a good mate of mine is 3/4 of the way through a jimny build with the Lexus 4.0l v8 lump, I've stolen his suspension set up and got a lot of ideas as he's been doing it, just had to get my house finished before the wife will let me play! Lol! The plan may change slightly along the way as I encounter problems but I want a strong truck with a big revvy petrol! :0)

04-02-2013, 12:23	#9
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	is this going to be a road legal beast or?

04-02-2013, 20:10	#10
matstar89 Member Join Date: Dec 2010 Location: north devon Vehicle: nissan terrano Posts: 62	Hoping so, my mate has made some enquiries regarding iva testing and has been told that he can weld too the chassis but not take anything away from it, but trying to get a straight answer is very difficult, I will see how my mate gets on with getting his legal first!! But it has to be road legal as a lot of winch challenge events require driving between stages.

04-02-2013, 21:01	#11
stinka Senior Member Join Date: Feb 2012 Location: Staffs Vehicle: '02 Terrano TDI sport lwb Posts: 3,787	That bit about welding too/not cutting away ... To add the solid axle up front u have to remove all the front suspension mounting gubbins and that's all welded to chassis, so how would that fair

04-02-2013, 21:10	#12
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	I guess it's just a mount, it's when you start cutting away the chassis.

05-02-2013, 22:52	#13
matstar89 Member Join Date: Dec 2010 Location: north devon Vehicle: nissan terrano Posts: 62	I'm not 100% sure, will have to look deeper into it when the time comes, but everything around iva's seem a bit grey, don't want to open a can of worms but nobody would blinks an eye when you see landies with shortened chassis' and winch bumpers welded in place?! But trying to get a straight answer or anything in writing is a nightmare, seems the people enforcing and regulating these rules don't even know them!! Haha! Keep getting directed to the .gov website which is a nightmare to pull any info from and contradicts itself all over the place! Anyway that's my rant over with for the night! Anyone found me a gearbox yet? :0))

23-02-2013, 21:45	#14
matstar89 Member Join Date: Dec 2010 Location: north devon Vehicle: nissan terrano Posts: 62	Anyone got or know of a terrano auto box up for grabs? Thinking of trying to get a terrano box to mate to the vg block as finding a patrol box is near impossible. Really want to keep this project auto if possible, cheers matt