Pedal removal and CPS

AlexD333 · 15-05-2015, 11:09

Hi chaps, top of the morning to ya *hats off emote*

How difficult is it to remove the throttle pedal? (want to clean the connector and test)

Also the crank position sensor I want to change as have no aquired one. Seen above bell housing, heard I/C removal needed but is there a step by step guide for dummies?

Madmark · 15-05-2015, 12:01

Could you get to it underneath bud as ten mm bolt and wiggle it out

AlexD333 · 15-05-2015, 14:19

Quote:

Originally Posted by Madmark

Could you get to it underneath bud as ten mm bolt and wiggle it out

Like bend arm round bellhousing and feel for it?

Plenty of room if i put it in the pit at work

bry · 15-05-2015, 14:51

Never done the 1st. CPS easy peasy.

Madmark · 15-05-2015, 15:20

I reckon easy too as our trucks have body lift so even more room

AlexD333 · 15-05-2015, 15:23

Quote:

Originally Posted by Madmark

I reckon easy too as our trucks have body lift so even more room

Right ok, thanks chaps, I will see if I can get underneath it and wrench my poor arm above the bell housing then

Any thoughts on the pedal?

makeitfit · 15-05-2015, 20:43

Pedal is dead easy. 2 or 3 10mm nuts on the floor under the pedal. Simples

AlexD333 · 23-05-2015, 06:51

I've had the Maf amp in now for a few days, drives with more power, my symptoms are still here though... Occasionally gutless or laggy from take off or slow crawl, any suggestions let me know...

I will try and clean pedal today at work

15-05-2015, 11:09	#1
AlexD333 Senior Member Join Date: Jan 2014 Location: Uk Vehicle: 2004 Terrano 2.7 TDI Posts: 7,847	Pedal removal and CPS Hi chaps, top of the morning to ya hats off emote How difficult is it to remove the throttle pedal? (want to clean the connector and test) Also the crank position sensor I want to change as have no aquired one. Seen above bell housing, heard I/C removal needed but is there a step by step guide for dummies?

15-05-2015, 12:01	#2
Madmark Senior Member Join Date: Aug 2014 Location: Dorset Vehicle: highly modded Terrano 2 Posts: 1,088	Could you get to it underneath bud as ten mm bolt and wiggle it out

15-05-2015, 14:51	#4
bry Senior Member Join Date: May 2013 Location: South Yorkshire.. Vehicle: Nissan Terrano MK 2 SE Posts: 1,757	Never done the 1st. CPS easy peasy.

15-05-2015, 15:20	#5
Madmark Senior Member Join Date: Aug 2014 Location: Dorset Vehicle: highly modded Terrano 2 Posts: 1,088	I reckon easy too as our trucks have body lift so even more room

15-05-2015, 20:43	#7
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Pedal is dead easy. 2 or 3 10mm nuts on the floor under the pedal. Simples

23-05-2015, 06:51	#8
AlexD333 Senior Member Join Date: Jan 2014 Location: Uk Vehicle: 2004 Terrano 2.7 TDI Posts: 7,847	I've had the Maf amp in now for a few days, drives with more power, my symptoms are still here though... Occasionally gutless or laggy from take off or slow crawl, any suggestions let me know... I will try and clean pedal today at work