Go Back   :::.Nissan 4x4 Owners Club.::: > General > The Clubs Virtual Pub

The Clubs Virtual Pub For general chat, so come on in and pull up a chair.

Reply
 
Thread Tools Display Modes
Old 06-12-2023, 05:01   #1
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,427
Default Replacement 15 Kva alternator

As said, old unit suffered a control box fire which required a complete replacement alternator, sounds easy enough until you understand that the old one was automatic and could be started from any place in the yard with a two wire switch, I needed to keep this arrangement for ease of use by none understanding people, so how do you with a two wire switch from any location start up a diesel gen set?

Bearing in mind that you first need to enable the fuel, then operate the starter and stop it once the engine has fired, but it does not stop there, you now need to only connect the alternator once the engine has got up to speed, then on shut down you need to disconnect the alternator from the load first, all of which will fry the automatic voltage controller if not done correctly, not a big deal on a modern cheap genny as they are cheap and available, but my 1970 kit not so easy.

I have sorted it but your thoughts on a post card please, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 08-12-2023, 13:20   #2
panelbeater
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Dec 2012
Location: clacton on sea essex
Vehicle: nissan terrano 2 2.7 tdi
Posts: 1,634
Default

bit of a headache there rick,sorry its beyond me but a good electrician should be helpful.
panelbeater is offline   Reply With Quote
Old 08-12-2023, 21:26   #3
jims-terrano
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Sep 2004
Location: UK
Posts: 12,965
Default

So am I right in thinking you are wanting to remote start a generator from pretty much anywhere on your property?

How about this little gadget, a GSM Relay that you control by text message.
https://www.gsm-uk.net/shop
This website is the company that I have used a few times before. Ive used the 4 channel version. You can get the relays to turn on or pulse like a momentary push switch.
The owner of the business is really helpful.
I got a sim card from a company called 1penny mobile, £30 a year works for me and because the sim has credit you can set the relay to text you back to confirm it has received your instructions.
jims-terrano is offline   Reply With Quote
Old 08-12-2023, 23:17   #4
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,427
Default

Yes Jim that is correct, we had that before with the original gen set and it was all controlled by the system on the alternator ( google Lister start O matic) for a full description, but now of course I have just an engine driving an alternator and needed to use the existing hard wired switches from most of the buildings in the yard that have a generator supply (7) all are simply two wires.

I have purchased an auto generator start control but it did not quite cut the mustard, so pulled it to bits and did some mods, now it works well, but does not address the connection/disconnection of the loads at start-up and shutdown, but with a couple more bits and bobs have sorted this, well on paper anyway, as I get into it properly next week if you are interested I will post some pics and details, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 09-12-2023, 21:51   #5
jims-terrano
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Sep 2004
Location: UK
Posts: 12,965
Default

Always interesting to hear about your off grid setup Rick
jims-terrano is offline   Reply With Quote
Old 10-12-2023, 01:05   #6
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,427
Default

Thanks Jim, only times I ran the genny from April to September was for the vehicle hoist and welder, solar provided for everything else including the washing machines and also the chainsaw for cutting logs as have now got a battery powered jobbie, charged by solar, pics next week, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 11-12-2023, 22:24   #7
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,427
Default

Busy on other jobs today but just done a schematic of the wiring, here it is.
Attached Images
File Type: jpg DSCN6805.jpg (27.1 KB, 10 views)
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 11-12-2023, 22:26   #8
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,427
Default

And this is the auto start box layout, I will not be using much of it as not applicable to my old Lister, Rick
Attached Images
File Type: jpg DSCN6806.jpg (30.3 KB, 10 views)
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 14-12-2023, 00:12   #9
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,427
Default

Added 8 more solar panels today, pic tomorrow as got dark just as we finished, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 14-12-2023, 01:49   #10
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,427
Default

Just had a count up from earlier pics, makes 38 so far, more to come, this is what stores my power Li that is, being reconfigured due to needed more space for 14 more cells due in the new year, the old lead acid are getting tired now so will be weighing them in before long, around a tonne of lead, Rick
Attached Images
File Type: jpg DSCN6807.jpg (65.7 KB, 10 views)
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 14-12-2023, 11:06   #11
jims-terrano
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Sep 2004
Location: UK
Posts: 12,965
Default

Thats an impressive setup Rick, definitely better than my little Solar setup.
jims-terrano is offline   Reply With Quote
Old 21-12-2023, 22:03   #12
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,427
Default

Here are a couple of the many cables needed to connect the banks together via heavy duty switches, I now crimp the terminals with the workshop bench vice after making a Die to suite, much quicker than solder
Attached Images
File Type: jpg DSCN6814.jpg (59.0 KB, 8 views)
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 21-12-2023, 22:04   #13
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,427
Default

Close up of the crimp
Attached Images
File Type: jpg DSCN6815.jpg (89.0 KB, 8 views)
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 21-12-2023, 22:06   #14
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,427
Default

Latest solar addition
Attached Images
File Type: jpg DSCN6816.jpg (82.3 KB, 7 views)
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 21-12-2023, 22:09   #15
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,427
Default

Revamp of the solar terminations and controllers, this is just for the Li cells the Lead Acid are still as was, will be getting on with more tomorrow, Rick
Attached Images
File Type: jpg DSCN6818.jpg (58.3 KB, 8 views)
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 11:38.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Images online photo albums