31" mud tyres and 8j rims

[baker1988]

Right here it goes need to free up some pennies towards my mission to get some 35's fitted so i have these up for grabs

they are only a couple months old rims could ideally do with a lick of paint tyres have been on 1 pay n play day and all in all covered 200 miles
coloured lines are still visible

couple of pics will get over to the terrano tomorrow and take a couple of pics for each corner

They are 15" 10.5 15

£350

[makeitfit]

35s you say Brave man, are you ready with your angle grinder

[baker1988]

Originally Posted by makeitfit

35s you say Brave man, are you ready with your angle grinder

angle grinders at the ready just bought a new welder too

let the fun begin i say

[makeitfit]

I've done 35s on mine, you will need a lot of work
Let me know if you need any help

[baker1988]

Originally Posted by makeitfit

I've done 35s on mine, you will need a lot of work
Let me know if you need any help

its going to take me a while but im prepared for it

ok thanks if i get stuck ill give you a shout

[makeitfit]

Originally Posted by baker1988

its going to take me a while but im prepared for it

Ha ha I look forward to another member of the 35 club
You'll need to power up the engine too as the gearing is awful otherwise
You'll need the steering toughened up too
Good luck

[baker1988]

Originally Posted by makeitfit

Ha ha I look forward to another member of the 35 club
You'll need to power up the engine too as the gearing is awful otherwise
You'll need the steering toughened up too
Good luck

Pump and turbo has been tweeked today what a pain getting to the pump though its going to be off the road for a while now Im going to try and tackle the steering mod myself see how I get on I like a challenge

[makeitfit]

Is yours TDi ? If so what pump mods are you upto ?

[stinka]

Originally Posted by makeitfit

Is yours TDi ? If so what pump mods are you upto ?

I'm interested to know this also

I've got a steering box sat in the garage but illness has meant I've not been able to get a grinder on it yet will do soon as tho

[baker1988]

Originally Posted by makeitfit

Is yours TDi ? If so what pump mods are you upto ?

Yes its the TDI not sure what to do and how much power I want yet will be looking more into it when I get these 35's fitted ive had a quick scout round the engine and im pretty sure its capable of a pretty decent amount of hp more will be revealed in time

[stinka]

Originally Posted by baker1988

Yes its the TDI not sure what to do and how much power I want yet will be looking more into it when I get these 35's fitted ive had a quick scout round the engine and im pretty sure its capable of a pretty decent amount of hp more will be revealed in time

Oh, I thought u said u'd tackled it today and it was a pain to reach

[makeitfit]

Can't wait I thought though that the ecu controlled pump was not the answer to extra omph on the TDi. There's some electrickery wizzadry that can help but too techy for me So went down the modded turbo and LPG injection route. Power chip helps get fuel in earlier but cant help get more out than the pump can handle , if you see what I mean.
Custom injectors though
Come on spill the beans

[baker1988]

Originally Posted by makeitfit

Can't wait I thought though that the ecu controlled pump was not the answer to extra omph on the TDi. There's some electrickery wizzadry that can help but too techy for me So went down the modded turbo and LPG injection route. Power chip helps get fuel in earlier but cant help get more out than the pump can handle , if you see what I mean.
Custom injectors though
Come on spill the beans

Ive not yet looked too much into it but a compensator and advanced timing is involved maybe a expensive mod but I will start a thread when it comes to doing the work

[makeitfit]

Originally Posted by baker1988

Ive not yet looked too much into it but a compensator and advanced timing is involved maybe a expensive mod but I will start a thread when it comes to doing the work

I'm nursing a semi

[baker1988]

Originally Posted by makeitfit

I'm nursing a semi

Erm dont suppose you know the size of the standard plunger do you? I know a trol is 10mm can be upgraded to 11 and even a 12 with modification i believe but cant find the info without taking it off