Go Back   :::.Nissan 4x4 Owners Club.::: > General > I'm new here, please be gentle

I'm new here, please be gentle This is where you can "introduce yourself". A chance for you as a new member to say hello and for you to tell us about yourselves, your truck and your other interests.

Reply
 
Thread Tools Display Modes
Old 13-06-2011, 23:10   #1
johnno
Member
Click here to find out how to become a paid up member
 
Join Date: Jun 2011
Location: Stonehaven, N.E. Scotland
Vehicle: 2004 Terrano 3.0 SVE
Posts: 45
Default Newbie with a problem - help. Please!

Good evening chaps and chappesses(?!) I hope all are well.

As the forum title suggests, please be gentle, I'm a (kinda) newbie to Terrano ownership

I bought and collected a 2004 LWB Terrano 3.0Td over the weekend, test drove it locally to the dealer and drove it 150 miles home no problem. She appears to be a nice example, 60k and a regularly stamped book. Got home, turned the engine off for about 5 mins, started her up again - oil light on. I've since done about 150 miles (100 or so towing a caravan) and there have been no problems. This morning, starting from cold - oil light on. Tow caravan 60 miles home, no oil light, no problem. The motors been started 2 or 3 times this evening sometimes light comes on, sometimes it doesn't.

My first instinct is that there's nothing wrong with the engine. No smoke, no loss of power, plenty oil.
I contacted the dealer who suggested a "faulty switch" which I expected to hear to be honest.

I suppose what I'm asking is, am I missing something obvious which would suggest something terminal? The other problem I have is that I have to go offshore on Wednesday so have very little time to investigate further and return the truck to the dealer should there be a problem.

Any replies hugely appreciated.

John.
johnno is offline   Reply With Quote
Old 13-06-2011, 23:14   #2
briggie
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Mar 2010
Location: peoples democratic republic of west yorkshire
Vehicle: " alice "
Posts: 10,473
Default

i know it sounds silly , but have you actually checked the oil level ?
briggie is offline   Reply With Quote
Old 13-06-2011, 23:23   #3
R1cho
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Aug 2010
Location: Wales
Vehicle: 1997 LandCruiser Colorado
Posts: 4,201
Default

sometimes my oil light stays on longer than it should, my oil levels are fine and i have never had any problems, does yours stay on or does it just stay on longer than it should then go off?
R1cho is offline   Reply With Quote
Old 13-06-2011, 23:36   #4
johnno
Member
Click here to find out how to become a paid up member
 
Join Date: Jun 2011
Location: Stonehaven, N.E. Scotland
Vehicle: 2004 Terrano 3.0 SVE
Posts: 45
Default

Cheers for the quick replies guys !

I have checked the oil several times, both when cold and at least half an hour after stopping engine. If anything, there may be slightly too much oil in there.

What happens is, that the light doesn't go off at all once started. But not every time! For example this morning, start from cold, light on. Short 5 min drive, stays on. Stop engine, leave half hour, start up, no light. Fine for journey home towing twin axle tin tent.

There appears to be no rhyme nor reason to when it stays on. Stayed on tonight after starting hot. Turn off, start immediately, no light .

what I have just noticed is that the oil hasn't been changed in a while, according to the service book. Would a change and filter replacement help?

Cheers,

John.
johnno is offline   Reply With Quote
Old 13-06-2011, 23:40   #5
R1cho
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Aug 2010
Location: Wales
Vehicle: 1997 LandCruiser Colorado
Posts: 4,201
Default

how many miles since last change?
R1cho is offline   Reply With Quote
Old 13-06-2011, 23:47   #6
jims-terrano
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Sep 2004
Location: UK
Posts: 12,965
Default

I'm sure I've heard of this before on the 3Litre. Best let the garage take a look to be sure though as you've only just bought it. Welcome aboard.

Jim
jims-terrano is offline   Reply With Quote
Old 13-06-2011, 23:59   #7
johnno
Member
Click here to find out how to become a paid up member
 
Join Date: Jun 2011
Location: Stonehaven, N.E. Scotland
Vehicle: 2004 Terrano 3.0 SVE
Posts: 45
Default

Erm...... 15k since last change according to service book...

Tomorrow will be mostly spent asking a couple of local 4x4 specialists if they can carry out a pressure check.

As a by the by, is the oil filter a paper cartridge type found on the housing to the nearside of the block? How easy to change and how much oil needed to replace?

The 3.0l is a completely new beast to me.

Cheers,

John.

p.s. cheers for the welcome, I may spend a lot of time on here....!
johnno is offline   Reply With Quote
Old 14-06-2011, 00:07   #8
R1cho
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Aug 2010
Location: Wales
Vehicle: 1997 LandCruiser Colorado
Posts: 4,201
Default

only thing on mine with paper is the air filter but mines a 2.7 dunno about the 3.0
R1cho is offline   Reply With Quote
Old 14-06-2011, 00:35   #9
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,429
Default

change the switch, only a few £s (any motor factors will have one) if still the same return it to the people you got it from, if you go to a garage for a pressure test it will cost more than replacing the switch, but sounds to me like switch problem, if you have no rattling starting from cold all should be well, if you do have rattling from cold for the first few seconds I would be very suspicious, Rick
solarman216 is offline   Reply With Quote
Old 14-06-2011, 09:26   #10
lacroupade
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2009
Location: All hail to the Glove of Love...
Posts: 9,212
Default

Quote:
Originally Posted by johnno View Post
Erm...... 15k since last change according to service book...

Tomorrow will be mostly spent asking a couple of local 4x4 specialists if they can carry out a pressure check.

As a by the by, is the oil filter a paper cartridge type found on the housing to the nearside of the block? How easy to change and how much oil needed to replace?

The 3.0l is a completely new beast to me.

Cheers,

John.

p.s. cheers for the welcome, I may spend a lot of time on here....!

Should be 6k intervals because of the turbo....and make sure you get a decent filter, don't skimp as the old Terrano notices and likes to get you back LOL.
lacroupade is offline   Reply With Quote
Old 14-06-2011, 10:44   #11
johnno
Member
Click here to find out how to become a paid up member
 
Join Date: Jun 2011
Location: Stonehaven, N.E. Scotland
Vehicle: 2004 Terrano 3.0 SVE
Posts: 45
Default

Quick update - the truck is currently with my friendly, local 4x4 specialist who's checking the pressure and changing the switch by the filter housing. Apparently, there's another pressure sensor on the opposite side of the block, but being more of a LR man, he doesn't have a lot of experience with Nissans' finest and isn't sure where it is exactly.

If I get the all clear from him, I'll be happy the engine isn't about to implode!
A new filter has been ordered and a change will be top of the list when i get home in a fortnights' time.

The next battle with the dealer will be for some re-compense for the list of advisories that came with the MOT which I was never shown......
But that's a whole new story......

Cheers,

John.
johnno is offline   Reply With Quote
Old 14-06-2011, 10:55   #12
lacroupade
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2009
Location: All hail to the Glove of Love...
Posts: 9,212
Default

Quote:
Originally Posted by johnno View Post
Quick update - the truck is currently with my friendly, local 4x4 specialist who's checking the pressure and changing the switch by the filter housing. Apparently, there's another pressure sensor on the opposite side of the block, but being more of a LR man, he doesn't have a lot of experience with Nissans' finest and isn't sure where it is exactly.

If I get the all clear from him, I'll be happy the engine isn't about to implode!
A new filter has been ordered and a change will be top of the list when i get home in a fortnights' time.

The next battle with the dealer will be for some re-compense for the list of advisories that came with the MOT which I was never shown......
But that's a whole new story......

Cheers,

John.
well remember that, whatever they try and say, the dealer has six months warranty obligation under the SoG Act.

This oil light thing is a known 3.0 issue and not a big deal as I recall.
lacroupade is offline   Reply With Quote
Old 14-06-2011, 10:56   #13
rayf3262
Senior Member
Click here to find out how to become a paid up member
 
rayf3262's Avatar
 
Join Date: Nov 2009
Location: Norfolk, Poringland NR14
Vehicle: Terrano 3.0 SVE 2002
Posts: 1,549
Default

There are two oil pressure switches on the ZD30 engine,, one low pressure & one high pressure.
rayf3262 is offline   Reply With Quote
Old 14-06-2011, 11:14   #14
johnno
Member
Click here to find out how to become a paid up member
 
Join Date: Jun 2011
Location: Stonehaven, N.E. Scotland
Vehicle: 2004 Terrano 3.0 SVE
Posts: 45
Default

Is the one by the filter housing the low or high pressure one?
And could you give me the location of the other one to pass on to the garage please?

Once again, thanks all for the replies. Much appreciated .
I can see me parting with a tenner sooner rather than later

Cheers,

John.
johnno is offline   Reply With Quote
Old 14-06-2011, 13:27   #15
apgphoto
Member
Click here to find out how to become a paid up member
 
Join Date: May 2011
Location: Wales
Vehicle: 2002 Terrano 3.0SVE
Posts: 41
Default

John,

I have just bought a 3.0 and it does exactly the same thing, as has been said is a known issue on these engines.

I was told its the sensor near the starter motor that is normally the one that plays up, I haven't checked the exact location as after a pressure check I wasn't too worried.

Paul
apgphoto is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 14:42.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Images online photo albums