Breaking Terrano 2 and Mavericks

[stinka]

Originally Posted by cncfabs

will check diff

Sweet mate, pm me when you get round to it

[cncfabs]

Originally Posted by stinka

Sweet mate, pm me when you get round to it

Checked the diff.Jacked car up both wheels turn in same direction as they should.Jacked one side up can still turn the wheel quite easily so not so good.Tried old shape t2 with one wheel off no chance of turning wheel.

[stinka]

Originally Posted by cncfabs

Checked the diff.Jacked car up both wheels turn in same direction as they should.Jacked one side up can still turn the wheel quite easily so not so good.Tried old shape t2 with one wheel off no chance of turning wheel.

sounds like a c200 rear diff lol

will you sell the rear axle as a whole to someone then ?

just wondered, because if you are not, I'd still be interested in the diff, as i will strip it and double up a pair of friction plates inside mine, ie. put 1 extra plate in either side, would work then I reckon

[leswingrove]

Originally Posted by cncfabs

I am beaking 3 terranos 1 pertol 2 diesel have most parts (no gearboxes) please contact me if you require any parts

im looking 4 o/s & n/s front wings

[cncfabs]

Originally Posted by leswingrove

im looking 4 o/s & n/s front wings

What year are they for

[ginge007]

do you still have the pasenger front wing of the 02 mk4

[cncfabs]

Originally Posted by ginge007

do you still have the pasenger front wing of the 02 mk4

Yes but have funny feeling its going to be rotten pushed against it didnt sound good will get it off in next few days and check it.Seems on later models they saved money on the underseal as with other nissans mrs has primera 02 reg looks stunning but rotten underneath

[ginge007]

ok let me know if its not to far gon i may still have it do u still have the front grill and the air box

[cncfabs]

Originally Posted by ginge007

ok let me know if its not to far gon i may still have it do u still have the front grill and the air box

yes still have them at moment only started taking it apart today

[rustic]

Originally Posted by cncfabs

Yes but have funny feeling its going to be rotten pushed against it didnt sound good will get it off in next few days and check it.Seems on later models they saved money on the underseal as with other nissans mrs has primera 02 reg looks stunning but rotten underneath

I also think the Ford spec on underseal was higher than their standard Nissan spec.
Had mine over 17 years from new, no rust, wings are perfect as new, I have had the plastic trim off both sides.

Mind you the waxoyl I put on 16.9 years ago was still there, so another thin coat added.
Here's to the next 17 years.

[cncfabs]

Originally Posted by rustic

I also think the Ford spec on underseal was higher than their standard Nissan spec.
Had mine over 17 years from new, no rust, wings are perfect as new, I have had the plastic trim off both sides.

Mind you the waxoyl I put on 16.9 years ago was still there, so another thin coat added.
Here's to the next 17 years.

Yes agreed the earlier square headlight ones like yours are better.Also the front wings dont have the big plastic trim to collect mud

[ginge007]

thanks mate pm me with prices

[firebobby]

I'm after the rubber boot that fits over the door switch for one of my rear doors or the complete switch if you have one, it's for a 2005 but they should all be the same I would have thought

[cncfabs]

Originally Posted by firebobby

I'm after the rubber boot that fits over the door switch for one of my rear doors or the complete switch if you have one, it's for a 2005 but they should all be the same I would have thought

Yes will get one off tomorrow

[stinka]

Originally Posted by stinka

sounds like a c200 rear diff lol

will you sell the rear axle as a whole to someone then ?

just wondered, because if you are not, I'd still be interested in the diff, as i will strip it and double up a pair of friction plates inside mine, ie. put 1 extra plate in either side, would work then I reckon

What do you reckon mate ?