where can i get - Page 2

R1cho · 12-10-2010, 13:23

i made a light like that for my mountain bike, run it of 12 aa batteries works a charm on the canal paths at night, best place to get connectors is local elecronics shop only cost a couple of quid.

R1cho · 12-10-2010, 13:29

to solve the problem of the glass cracking mount them behind either a secong piece of glass or perspex, as though they are wearing a pair of eye protectors if you like. this will keep cold water off the main lenses protecting them from cracking.

zippy656 · 12-10-2010, 13:43

im on it now thanks. how did you hold the lapms on the bike?

R1cho · 12-10-2010, 13:46

bike light clamps, though for a truck i'd imagine something like U bolts would be better

zippy656 · 12-10-2010, 13:49

got a pic/???

R1cho · 12-10-2010, 14:43

yep i have, sorry took a while had to dig it out the shed.

R1cho · 12-10-2010, 14:54

and a side view

zippy656 · 12-10-2010, 16:47

looks good..

R1cho · 12-10-2010, 17:37

that was made with a simple aerosol lid and black electrical tape lol

zippy656 · 15-10-2010, 06:00

what about the heat... was playing last night got HOT HOT HOT!!

R1cho · 15-10-2010, 11:02

yea they do get a tad warm, that light was only run on 12 aa batteries though not a whopping big 12v car battery lol, never melted the plastic tho and they ran for a good hour before starting to lose power, i suppose they keep cool when your moving, so when on a car you can move faster than a mountain bike so should keep them very cool, failing that use alluminium as housing, you can get cheap alluminium torches, I bet the housing off one of them would do, also then you have the extra glass to cover the front already made and in place. I'm thinking of starting a project like this myself, we will have to compare notes on what we find best to use.

zippy656 · 15-10-2010, 11:05

like the torch idea..

i was also thinking of mounting into so box section. with holes for the lights... will have abash at a draweing later... see what you think

R1cho · 15-10-2010, 11:08

i was thinking of something along those lines.

zippy656 · 15-10-2010, 11:29

the white down pipe was what i was thinking. cut over the roof rails and "U" bolted on.

rustic · 15-10-2010, 11:41

Most of these lamps are designed to pass most of the heat to the rear, so allow a little ventilation at the back, a couple of small holes at the bottom and a few at the back, will help I would have thought.
Even hack saw cuts may do it, but arrange them so direct water doesn't gets in and onto the rear of the lens or on to your connectors.

You will get some light leakage, so you could always include a small matt black baffle behind the lens.

What you really need is some matt black anodised aluminium tube. Or even stainless, there are several suppliers of standard Aluminium tube on ebay.

You have me thinking about this one..... They should fit nicely behind the grille as well.

15-10-2010, 11:08	#28
R1cho Senior Member Join Date: Aug 2010 Location: Wales Vehicle: 1997 LandCruiser Colorado Posts: 4,201	i was thinking of something along those lines. Last edited by R1cho; 15-10-2010 at 11:09. Reason: typo

15-10-2010, 11:41	#30
rustic Senior Member Join Date: Feb 2007 Location: Staffordshire Vehicle: Maverick Mk I 2.7 TD LWB Posts: 7,825	Most of these lamps are designed to pass most of the heat to the rear, so allow a little ventilation at the back, a couple of small holes at the bottom and a few at the back, will help I would have thought. Even hack saw cuts may do it, but arrange them so direct water doesn't gets in and onto the rear of the lens or on to your connectors. You will get some light leakage, so you could always include a small matt black baffle behind the lens. What you really need is some matt black anodised aluminium tube. Or even stainless, there are several suppliers of standard Aluminium tube on ebay. You have me thinking about this one..... They should fit nicely behind the grille as well. __________________ Ford Maverick GLX 1995 2.7TD LWB in illusion silver, 98k miles. Owned since new, for 22 years. Best car I have ever owned. Just wish I could drive it more.

12-10-2010, 13:23	#16
R1cho Senior Member Join Date: Aug 2010 Location: Wales Vehicle: 1997 LandCruiser Colorado Posts: 4,201	i made a light like that for my mountain bike, run it of 12 aa batteries works a charm on the canal paths at night, best place to get connectors is local elecronics shop only cost a couple of quid.

12-10-2010, 13:29	#17
R1cho Senior Member Join Date: Aug 2010 Location: Wales Vehicle: 1997 LandCruiser Colorado Posts: 4,201	to solve the problem of the glass cracking mount them behind either a secong piece of glass or perspex, as though they are wearing a pair of eye protectors if you like. this will keep cold water off the main lenses protecting them from cracking.

12-10-2010, 13:43	#18
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	im on it now thanks. how did you hold the lapms on the bike?

12-10-2010, 13:46	#19
R1cho Senior Member Join Date: Aug 2010 Location: Wales Vehicle: 1997 LandCruiser Colorado Posts: 4,201	bike light clamps, though for a truck i'd imagine something like U bolts would be better

12-10-2010, 13:49	#20
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	got a pic/???

12-10-2010, 16:47	#23
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	looks good..

12-10-2010, 17:37	#24
R1cho Senior Member Join Date: Aug 2010 Location: Wales Vehicle: 1997 LandCruiser Colorado Posts: 4,201	that was made with a simple aerosol lid and black electrical tape lol

15-10-2010, 06:00	#25
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	what about the heat... was playing last night got HOT HOT HOT!!

15-10-2010, 11:02	#26
R1cho Senior Member Join Date: Aug 2010 Location: Wales Vehicle: 1997 LandCruiser Colorado Posts: 4,201	yea they do get a tad warm, that light was only run on 12 aa batteries though not a whopping big 12v car battery lol, never melted the plastic tho and they ran for a good hour before starting to lose power, i suppose they keep cool when your moving, so when on a car you can move faster than a mountain bike so should keep them very cool, failing that use alluminium as housing, you can get cheap alluminium torches, I bet the housing off one of them would do, also then you have the extra glass to cover the front already made and in place. I'm thinking of starting a project like this myself, we will have to compare notes on what we find best to use.

15-10-2010, 11:05	#27
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	like the torch idea.. i was also thinking of mounting into so box section. with holes for the lights... will have abash at a draweing later... see what you think

15-10-2010, 11:29	#29
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,137	the white down pipe was what i was thinking. cut over the roof rails and "U" bolted on.