Parts for Terrano II - Page 2

Koops · 26-10-2015, 22:12

Rick, Milner calls it the "lower wishbone rod bush kit" - they have it, but surprisingly not the spindle! I do not yet know where to get that now. In drawing below I have marked bushing and spindle in red circles:

solarman216 · 26-10-2015, 22:23

OK I have a couple of scrappers that these will be on, see if I can get a pair off for you at the W/E, sorry but very busy at the mo, Rick

Koops · 26-10-2015, 22:50

Quote:

Originally Posted by solarman216

OK I have a couple of scrappers that these will be on, see if I can get a pair off for you at the W/E, sorry but very busy at the mo, Rick

Would be nice!

solarman216 · 04-11-2015, 23:41

sorry Koops been very busy, yes I have these spindles but as you realise the torsion bars have to be removed to get them out, I have a motor ready for this but still a lot of work and do not know if the bolts will come undone easy or not, so before I get on my back and try to extract these, have you inquired of Nissan as to there availability, as I can see me spending hours removing same? Rick

Koops · 10-11-2015, 13:54

Quote:

Originally Posted by solarman216

sorry Koops been very busy, yes I have these spindles but as you realise the torsion bars have to be removed to get them out, I have a motor ready for this but still a lot of work and do not know if the bolts will come undone easy or not, so before I get on my back and try to extract these, have you inquired of Nissan as to there availability, as I can see me spending hours removing same? Rick

Hi Rick - please call me Pepijn (my first name). I have not yet inquired Nissan but will do so. Thought you might have a good trick to get these spindles out of their bushings. As for me, I did not - that's the reason why I had to cut them through which was not easy at all (spent days on it). I'll return my information to you soon. Thanks for not having forgotten me by the way.

Koops · 24-01-2016, 18:22

Quote:

Originally Posted by solarman216

sorry Koops been very busy, yes I have these spindles but as you realise the torsion bars have to be removed to get them out, I have a motor ready for this but still a lot of work and do not know if the bolts will come undone easy or not, so before I get on my back and try to extract these, have you inquired of Nissan as to there availability, as I can see me spending hours removing same? Rick

Hi Rick, sorry for my delay - I have not managed to get my car ready before having to abandon my house. By now, we have moved to another adress, and the car also has been moved to a nice place to continue working on it - not easy - it had to be picked up out of our front yard with a fork lift. Meanwhile (been guiding people for three weeks in Cameroon too) - yes, Nissan can provide my requested pieces (one bushing EUR 55,-; the accompanying bolt EUR 24,-, all excluding VAT of course) so for the two sides of my car that will account for about EUR 180 (2 bolts + 2 bushings)... I am still checking if there may be another solution with www.alibaba.com - do you have any experience with that?

solarman216 · 24-01-2016, 22:22

Quote:

Originally Posted by Koops

Hi Rick, sorry for my delay - I have not managed to get my car ready before having to abandon my house. By now, we have moved to another adress, and the car also has been moved to a nice place to continue working on it - not easy - it had to be picked up out of our front yard with a fork lift. Meanwhile (been guiding people for three weeks in Cameroon too) - yes, Nissan can provide my requested pieces (one bushing EUR 55,-; the accompanying bolt EUR 24,-, all excluding VAT of course) so for the two sides of my car that will account for about EUR 180 (2 bolts + 2 bushings)... I am still checking if there may be another solution with www.alibaba.com - do you have any experience with that?

no experience with alibaba at all, I think maybe I can cut the complete wishbones off with the angle grinder and send them to you £50 plus P & P if that helps, Rick

26-10-2015, 22:23	#17
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	OK I have a couple of scrappers that these will be on, see if I can get a pair off for you at the W/E, sorry but very busy at the mo, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

04-11-2015, 23:41	#19
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	sorry Koops been very busy, yes I have these spindles but as you realise the torsion bars have to be removed to get them out, I have a motor ready for this but still a lot of work and do not know if the bolts will come undone easy or not, so before I get on my back and try to extract these, have you inquired of Nissan as to there availability, as I can see me spending hours removing same? Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.