My new terrano problems - Page 2

cncfabs · 04-09-2013, 19:57

Quote:

Originally Posted by micktheshed

Thats one of the things I find realy useful compared to my previous Frontera.
Don't like lack of grease nipples though, after going through the wet stuff I can't re-grease to keep it all clean! Frontera props never failed but I don't expect Terrano's 'sealed' joints to last very long.

They are only sealed on the later terrano earlier ones had grease nipples

Evans4x4 · 05-09-2013, 16:35

Quote:

Originally Posted by stevo

I'd check the guard at the front of the rear prop - mine squeaks, particularly on corners. I was worse before i 'moved' it with a hammer

I couldn't find a guard on any of the props

exosteve · 05-09-2013, 20:34

hi.
I cant remember if I said welcome to the club to you but welcome to the club.
I too brought mine from a garage with a full mot.
I don't know who passed it they should of been sacked.
everything that should of been rubber was knackerd. I had to replace lots of bits as soon as I brought it.
I brought it in winter at a high price,got it home and had trouble starting it constantly,changed the glow plugs did a service and still it wouldn't start. turned out to be the relay. or at least I hope , I will find out in winter I suppose.
The tyres had been reversed to make look ok and he even give me a recipt for new tyres.cheeky twat.
my point is ive done all the jobs (apart from the rattly gearbox).
and the body work is sound with not much rust.the chassis has now been fully hammerited and waxoyled. the engine and box have been serviced with every oil and filter.the diff oil is new and I feel confident its as good as its going to be for its age.
things are going to fall off and break but everything can be replaced easily enough and there is more info on here that one brain can manage.
everyones friendly and a few might even come help you out if local enough.
don't be to disappointed with your new motor.As long as the body and chasis are ok bear with it and bond. get these jobs done and trust your motor as nissans are brill

exosteve · 05-09-2013, 20:37

And whats more you live in wales

.
theres a few members over there if you can find them amongst the sheep.
and you've got strata florida there too

steve

briggie · 05-09-2013, 20:38

yep , pay ya tenner and get access to the members map , and loads of information and help

cncfabs · 05-09-2013, 20:52

Quote:

Originally Posted by Evans4x4

I couldn't find a guard on any of the props

The guard is on the end of the gearbox

05-09-2013, 20:37	#19
exosteve Senior Member Join Date: Dec 2012 Location: stoke on trent Vehicle: 2001 2.7 td lwb terrano Posts: 2,740	And whats more you live in wales. theres a few members over there if you can find them amongst the sheep. and you've got strata florida there too steve

05-09-2013, 20:34	#18
exosteve Senior Member Join Date: Dec 2012 Location: stoke on trent Vehicle: 2001 2.7 td lwb terrano Posts: 2,740	hi. I cant remember if I said welcome to the club to you but welcome to the club. I too brought mine from a garage with a full mot. I don't know who passed it they should of been sacked. everything that should of been rubber was knackerd. I had to replace lots of bits as soon as I brought it. I brought it in winter at a high price,got it home and had trouble starting it constantly,changed the glow plugs did a service and still it wouldn't start. turned out to be the relay. or at least I hope , I will find out in winter I suppose. The tyres had been reversed to make look ok and he even give me a recipt for new tyres.cheeky twat. my point is ive done all the jobs (apart from the rattly gearbox). and the body work is sound with not much rust.the chassis has now been fully hammerited and waxoyled. the engine and box have been serviced with every oil and filter.the diff oil is new and I feel confident its as good as its going to be for its age. things are going to fall off and break but everything can be replaced easily enough and there is more info on here that one brain can manage. everyones friendly and a few might even come help you out if local enough. don't be to disappointed with your new motor.As long as the body and chasis are ok bear with it and bond. get these jobs done and trust your motor as nissans are brill

05-09-2013, 20:38	#20
briggie Senior Member Join Date: Mar 2010 Location: peoples democratic republic of west yorkshire Vehicle: " alice " Posts: 10,473	yep , pay ya tenner and get access to the members map , and loads of information and help