Terrano tuning - Page 7

Joakim02 · 13-04-2020, 18:40

Quote:

Originally Posted by george

If any one wants installation instructions then please leave your email and I will forward them to you

I personally ran one for 25k turned up as much as my clutch would take and had no issue... it's a big mod in the vw scene just we use a different pin out on the ecu

Before these where offered to sale it was run past the electricians and instrument techs at my work!!

One box was run on a dyno in Australia at a diesel tuning shop!! These are where my figures are from! The shop where very impressed as they mainly deal with big Cummins ect

At the end of the day it's down to the individual, when I first posted here I was told it couldn't be done... well it can and if you want some more power then knock yourself out..

could you please forward them to me? Email: joakimlindgaard@outlook.com thanks alot in advance

Sema_Campos · 06-09-2020, 14:45

Sigue abierto el hilo? Estaría interesado en fabricar me un MAF AMP. Si alguien me pudiese dar instrucciones se lo agradecería.

Banshee · 06-09-2020, 20:07

Quote:

Originally Posted by Sema_Campos

Sigue abierto el hilo? Estaría interesado en fabricar me un MAF AMP. Si alguien me pudiese dar instrucciones se lo agradecería.

I'm afraid that we don't have many (if any) Spanish speaking members on the forum, I understood MAF

Wallace · 06-09-2020, 21:34

Quote:

Originally Posted by Sema_Campos

Sigue abierto el hilo? Estaría interesado en fabricar me un MAF AMP. Si alguien me pudiese dar instrucciones se lo agradecería.

Google translate gave this:

Is the thread still open? I would be interested in making myself a MAF AMP. If someone could give me instructions I would appreciate it.

solarman216 · 06-09-2020, 22:40

I do believe that when RayF was making them he put a diagram up of the module , so a bit of searching is called for, Rick

Jazeitonas · 12-09-2021, 20:27

Quote:

Originally Posted by george

Hi if you drop me your email I can send you pics where to wire into

I recommend cab mounted

It is to some extent trial and error to suit each truck and driver... I recommend dialing it down until idle turns lumpy or picks up then knock it back a touch, 9 times out of 10 this will want slight adjustmen after a few miles

On my personal trucks I tend to run one set at a happy medium for every day then install a second one on a switch for full power/smoke

Cheers

Do you still have the diagrams?

BuliT3 · 28-12-2023, 18:47

Could anyone send me a wiring diagram for the pot and resistor for the Zexel pump? My mail: kszostak95@wp.pl

solarman216 · 28-12-2023, 18:59

I am not sure I still have one as do not think it actually works so probably deleted it in disgust, Banshee might know but he is not on much, the MAF amp certainly does work but Ray is no longer building them, Rick

BuliT3 · 28-12-2023, 19:29

Does anyone have a diagram on how to do it?

06-09-2020, 22:40	#95
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,429	I do believe that when RayF was making them he put a diagram up of the module , so a bit of searching is called for, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

28-12-2023, 18:59	#98
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,429	I am not sure I still have one as do not think it actually works so probably deleted it in disgust, Banshee might know but he is not on much, the MAF amp certainly does work but Ray is no longer building them, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

06-09-2020, 14:45	#92
Sema_Campos Junior Member Join Date: Apr 2020 Location: España Vehicle: Nissan Terrano 2 Posts: 1	Sigue abierto el hilo? Estaría interesado en fabricar me un MAF AMP. Si alguien me pudiese dar instrucciones se lo agradecería.

28-12-2023, 18:47	#97
BuliT3 Junior Member Join Date: Dec 2023 Location: Poland Vehicle: Nissan Terrano II Posts: 2	Could anyone send me a wiring diagram for the pot and resistor for the Zexel pump? My mail: kszostak95@wp.pl

28-12-2023, 19:29	#99
BuliT3 Junior Member Join Date: Dec 2023 Location: Poland Vehicle: Nissan Terrano II Posts: 2	Does anyone have a diagram on how to do it?