Rear Bump Rubbers

solarman216 · 25-02-2018, 23:23

I am sure some while ago a member found these for another motor at a reasonable price that fit a T2 and my Y60 looks just the same so need a couple but who was the supplier? Rick

Thomas61 · 26-02-2018, 00:05

Hi

The link below is within the Thread below that, if any help.

https://shop.febest.eu/catalog/rubbe...&model=TERRANO

http://www.nissan4x4ownersclub.com/f...rear+bump+stop

solarman216 · 26-02-2018, 00:40

Thank's Thomas but not paying 39 euros each, Rick

Thomas61 · 26-02-2018, 01:30

Quote:

Originally Posted by solarman216

Thank's Thomas but not paying 39 euros each, Rick

I was surprised at the price, honestly thought they would be around the £12-£15 mark.

solarman216 · 26-02-2018, 02:41

we did find on here a much more reasonable deal but cannot find it.Rick

Mav96 · 26-02-2018, 08:56

Try here but it appears they dont have the cheap alternatives available at the moment

https://partsouq.com/en/search/all?q=55060-41G00

solarman216 · 26-02-2018, 20:55

Quote:

Originally Posted by Mav96

Try here but it appears they dont have the cheap alternatives available at the moment

https://partsouq.com/en/search/all?q=55060-41G00

Thanks for that, shame they have none at the mo but will keep an eye, Rick

Fez_uk · 27-02-2018, 10:10

Think I have a used one in the shed, You can have it for postage costs.

I might need to measure it.

Thomas61 · 27-02-2018, 16:29

Hi,
This is a shot in the dark as unsure about sizes but the shape looks right although the fixing plate may/will need moding.

Milners do a bump stop for a isuzu which is only £12.

https://www.milneroffroad.com/isuzu/...bump-stop-rear

Thomas61 · 27-02-2018, 16:31

This is the Milners one.

C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_3988e09c16cce9919e2dd36bd83c5ef.jpg

solarman216 · 27-02-2018, 16:51

Thanks for that, looks like it could be welded to the original plate which would give it the correct angle, Rick

Thomas61 · 27-02-2018, 17:12

Japanese 4x4 parts also do them if Milners is not a place you want to shop. Again not sure of the actual size though.

http://www.japanese4x4parts.co.uk/is...per-7371-p.asp

solarman216 · 08-03-2018, 21:23

Got a pair from Jap 4 x 4 they are a little smaller than T2 ones and as both are missing on the Troll I have no idea what they should look like but these are going on anyway, cheers, Rick

25-02-2018, 23:23	#1
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,429	Rear Bump Rubbers I am sure some while ago a member found these for another motor at a reasonable price that fit a T2 and my Y60 looks just the same so need a couple but who was the supplier? Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

26-02-2018, 00:40	#3
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,429	Thank's Thomas but not paying 39 euros each, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

26-02-2018, 02:41	#5
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,429	we did find on here a much more reasonable deal but cannot find it.Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

27-02-2018, 16:51	#11
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,429	Thanks for that, looks like it could be welded to the original plate which would give it the correct angle, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

08-03-2018, 21:23	#13
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,429	Got a pair from Jap 4 x 4 they are a little smaller than T2 ones and as both are missing on the Troll I have no idea what they should look like but these are going on anyway, cheers, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

26-02-2018, 00:05	#2
Thomas61 Senior Member Join Date: Sep 2014 Location: Hampshire Vehicle: Terrano but now Honda CRV Posts: 658	Hi The link below is within the Thread below that, if any help. https://shop.febest.eu/catalog/rubbe...&model=TERRANO http://www.nissan4x4ownersclub.com/f...rear+bump+stop

26-02-2018, 08:56	#6
Mav96 Senior Member Join Date: Mar 2014 Location: Hastings, South East Vehicle: Maverick 96 2.7 Lwb Tdi Posts: 437	Try here but it appears they dont have the cheap alternatives available at the moment https://partsouq.com/en/search/all?q=55060-41G00

27-02-2018, 10:10	#8
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	Think I have a used one in the shed, You can have it for postage costs. I might need to measure it.

27-02-2018, 16:29	#9
Thomas61 Senior Member Join Date: Sep 2014 Location: Hampshire Vehicle: Terrano but now Honda CRV Posts: 658	Hi, This is a shot in the dark as unsure about sizes but the shape looks right although the fixing plate may/will need moding. Milners do a bump stop for a isuzu which is only £12. https://www.milneroffroad.com/isuzu/...bump-stop-rear

27-02-2018, 16:31	#10
Thomas61 Senior Member Join Date: Sep 2014 Location: Hampshire Vehicle: Terrano but now Honda CRV Posts: 658	This is the Milners one. C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_3988e09c16cce9919e2dd36bd83c5ef.jpg

27-02-2018, 17:12	#12
Thomas61 Senior Member Join Date: Sep 2014 Location: Hampshire Vehicle: Terrano but now Honda CRV Posts: 658	Japanese 4x4 parts also do them if Milners is not a place you want to shop. Again not sure of the actual size though. http://www.japanese4x4parts.co.uk/is...per-7371-p.asp