![]() |
![]() |
#16 | |
Senior Member
Join Date: Jun 2012
Location: Sevenoaks, Kent
Vehicle: Terrano 2.7TDi SE Touring
Posts: 5,221
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#17 |
Senior Member
Join Date: Dec 2012
Location: stoke on trent
Vehicle: 2001 2.7 td lwb terrano
Posts: 2,740
|
![]()
my truck is so high up I don't need one
![]() |
![]() |
![]() |
![]() |
#18 |
Senior Member
Join Date: Dec 2011
Location: Chateaunef du Faou, France
Vehicle: 2000 LWB SE+
Posts: 906
|
![]()
Blocks,sand and cement delivered and some 2x2 and sterling board for the shuttering.
|
![]() |
![]() |
![]() |
#19 |
Senior Member
Join Date: Dec 2011
Location: Chateaunef du Faou, France
Vehicle: 2000 LWB SE+
Posts: 906
|
![]()
Made the shuttering in sections 200mm deep and drilled 12mm holes every 200 mm then pined it down with 12mm re bar and leveled up
|
![]() |
![]() |
![]() |
#20 |
Senior Member
Join Date: Feb 2012
Location: South Bucks
Vehicle: Terrano 3.0 SVE 2005
Posts: 3,499
|
![]()
Are you using a DPM under the concrete base
|
![]() |
![]() |
![]() |
#21 |
Senior Member
Join Date: Dec 2011
Location: Chateaunef du Faou, France
Vehicle: 2000 LWB SE+
Posts: 906
|
![]()
Dpm was fitted inside the shuttering , but due to the road outside being to narrow and one of the main roads through the town it was not possible to block it with a cement truck . so it was necessary to mix all the concrete for the base by hand
![]() |
![]() |
![]() |
![]() |
#22 |
Senior Member
Join Date: Jul 2013
Location: west yorkshire
Vehicle: 1998,1999, 2000, 2.7TDi
Posts: 626
|
![]()
looking good pal,
can`t wait to see the end result ![]() |
![]() |
![]() |
![]() |
#23 |
Senior Member
Join Date: Dec 2010
Location: Telford, Shropshire
Vehicle: Nissan Patrol y60 4.2d
Posts: 1,287
|
![]()
Looking good
Sent from my iPhone using Tapatalk |
![]() |
![]() |
![]() |
#24 |
Senior Member
Join Date: Dec 2011
Location: Chateaunef du Faou, France
Vehicle: 2000 LWB SE+
Posts: 906
|
![]()
Three sections of raft completed but couldn't resist the urge to start laying blocks . the blocks are standard blocks here 20x20x50cm with built in perps ,just butt and fill. There will be three windows, a 3mx2m garage door and a door in the back.
|
![]() |
![]() |
![]() |
#25 |
Senior Member
Join Date: May 2013
Location: France
Vehicle: nissan patrol gr y60
Posts: 265
|
![]()
Looks like you thought of everything,not just electrical gaine but water pipes and waste,you'll be able to plumb in a shower as well as sink!
![]() |
![]() |
![]() |
![]() |
|
|