Wanted - Auto Hub Washer

Banshee · 31-05-2013, 21:36

I need the part highlighted in yellow from the picture below

It's the part that slots into the grooves in front of the washer that screws into the threaded washer that holds the bearing in place

The teeth all seem to be chewed up on mine and it doesn't seem to be going back far enough so the circlip drops into the groove

Thanks in advance

solarman216 · 31-05-2013, 23:19

that looks like the fixed brake ring, hens teeth, I will take a pic tomoz to show you, Rick

solarman216 · 01-06-2013, 10:37

Is this what you want? what have you done with yours, they do not normally break? Rick

Banshee · 01-06-2013, 15:56

Quote:

Originally Posted by solarman216

Is this what you want? what have you done with yours, they do not normally break? Rick

Thats the one mate, teeth have got chewed up on mine

solarman216 · 01-06-2013, 17:39

PM me your address and I will post it off on Monday, £5 plus P & P, Rick

31-05-2013, 21:36	#1
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	Wanted - Auto Hub Washer I need the part highlighted in yellow from the picture below It's the part that slots into the grooves in front of the washer that screws into the threaded washer that holds the bearing in place The teeth all seem to be chewed up on mine and it doesn't seem to be going back far enough so the circlip drops into the groove Thanks in advance __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!! Last edited by Banshee; 19-07-2017 at 11:15.

31-05-2013, 23:19	#2
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,428	that looks like the fixed brake ring, hens teeth, I will take a pic tomoz to show you, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

01-06-2013, 17:39	#5
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,428	PM me your address and I will post it off on Monday, £5 plus P & P, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.