Number1 (No1) Injector needed

shadowbroker · 28-05-2013, 23:02

Hello, Does anyone have a working No1 diesel injector available for sale?

I have the Zexel setup on a 2.7TDi 1999 auto

thank you in advance.

clivvy · 28-05-2013, 23:04

I sold one recently to makeitfit, might be worth sending him a pm? Otherwise you're looking at over £130 new.

frosty · 28-05-2013, 23:20

The one I am breaking is the hitachi system is that the one your wanting?

shadowbroker · 29-05-2013, 10:28

Quote:

Originally Posted by frosty

The one I am breaking is the hitachi system is that the one your wanting?

yes i think so.

i have a Hitachi MAF with Zexel ECU/Pump

other problem i have is that, i think someone has applied what i think is a liquid type of PTFE so i will need to maybe add a little heat or something to get it off.

clivvy · 30-05-2013, 13:06

Quote:

Originally Posted by shadowbroker

yes i think so.

i have a Hitachi MAF with Zexel ECU/Pump

other problem i have is that, i think someone has applied what i think is a liquid type of PTFE so i will need to maybe add a little heat or something to get it off.

you will need a special socket to remove the injector (or just remove it in stages) but youll need a special socket to fit the new one anyway! I had to make my own by using a standard injector socket, and chopping off the right amount to allow the sensor and wire through, I have a document somewhere if you would like it, but makeitfit has my old injector and socket. Be really careful though, I needed a sturdy extension bar to get mine out and the modified socket isn't as strong-be careful!

bonesXU1 · 30-05-2013, 19:55

Be careful when you remove it, worth doing when the engine is hot, mine was that tight it cracked a Snapon injector socket. I managed to get it out and new one fitted before I noticed the socket had snapped.

clivvy · 30-05-2013, 20:01

yup, as above. I had to use a really long and heavy extension bar and lean into it pushing as I went to crack it loose....

shadowbroker · 31-05-2013, 00:48

Sounds like a right royal pain in the ass... Nice sunny day sort of a job.

28-05-2013, 23:02	#1
shadowbroker Senior Member Join Date: Nov 2012 Location: north west Vehicle: Nissan Terrano 3.0 Posts: 192	Number1 (No1) Injector needed Hello, Does anyone have a working No1 diesel injector available for sale? I have the Zexel setup on a 2.7TDi 1999 auto thank you in advance.

28-05-2013, 23:20	#3
frosty Senior Member Join Date: Oct 2012 Location: Yorkshire Vehicle: 98 Ford Maverick 2.7 tdi Posts: 204	Injecter The one I am breaking is the hitachi system is that the one your wanting?

28-05-2013, 23:04	#2
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	I sold one recently to makeitfit, might be worth sending him a pm? Otherwise you're looking at over £130 new.

30-05-2013, 19:55	#6
bonesXU1 Senior Member Join Date: Sep 2011 Location: I.O.M Vehicle: Terrano 2 Posts: 212	Be careful when you remove it, worth doing when the engine is hot, mine was that tight it cracked a Snapon injector socket. I managed to get it out and new one fitted before I noticed the socket had snapped.

30-05-2013, 20:01	#7
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	yup, as above. I had to use a really long and heavy extension bar and lean into it pushing as I went to crack it loose....

31-05-2013, 00:48	#8
shadowbroker Senior Member Join Date: Nov 2012 Location: north west Vehicle: Nissan Terrano 3.0 Posts: 192	Sounds like a right royal pain in the ass... Nice sunny day sort of a job.