Heater blower don't blow

sperko · 05-10-2009, 19:38

Hi guys
My blower motor has packed up but I put + Feed to the motor and every thing works and befor any bright spark says it Yes i've checked the fuses and there is no supply Is there a relay feeding the fuses ?? if so where is it don't want to start rewiring unless I have to PLEAS HELP GUYS IT GETTING BL--DY COLD IN THE MORNINGS I'm not an autosparky but an electrical service engineer I mend the stuff in garages and petrol stations so I do under stand the tecky talk If any of you guys need help with this type of gear you know where I am:confused

clivvy · 05-10-2009, 19:52

Quote:

Originally Posted by sperko

Hi guys
My blower motor has packed up but I put + Feed to the motor and every thing works and befor any bright spark says it Yes i've checked the fuses and there is no supply Is there a relay feeding the fuses ?? if so where is it don't want to start rewiring unless I have to PLEAS HELP GUYS IT GETTING BL--DY COLD IN THE MORNINGS I'm not an autosparky but an electrical service engineer I mend the stuff in garages and petrol stations so I do under stand the tecky talk If any of you guys need help with this type of gear you know where I am:confused

well, i had this on my MX6, for me, two things, 1 - blown heater resistor and 2 - the actual switch had blown, had to replace both (the speed selector)

zippy656 · 05-10-2009, 19:57

http://bebrs.pie-dabas.net/Webs/Terrano/R20/fwd.pdf
try here, you might need to be blue to read it though..

should understand it I'm sure

sperko · 05-10-2009, 20:34

Cheers zippy656 there is a relay all I've got do now is find it

zippy656 · 05-10-2009, 21:15

thats cool, no worries.

ill just say its black.. or gray.. could be green or blue too.

sperko · 05-10-2009, 21:49

zippy I have just been give a disc you could be inerested in from a friend in da motor trade nuge nuge wink wink

zippy656 · 05-10-2009, 21:55

oh, do tell??

Hilltop · 06-10-2009, 13:23

Blower relay is on the back of the fuse box (inside car left of stering column) remove fuse box to get at it (2 screws) down load zips manual its all on there.

Bob (Hilltop)

ps> Its the bottom left hand relay when when you get the box off

elty001 · 06-10-2009, 19:51

Quote:

Originally Posted by sperko

Hi guys
My blower motor has packed up but I put + Feed to the motor and every thing works and befor any bright spark says it Yes i've checked the fuses and there is no supply Is there a relay feeding the fuses ?? if so where is it don't want to start rewiring unless I have to PLEAS HELP GUYS IT GETTING BL--DY COLD IN THE MORNINGS I'm not an autosparky but an electrical service engineer I mend the stuff in garages and petrol stations so I do under stand the tecky talk If any of you guys need help with this type of gear you know where I am:confused

if it works on full it will be the resistor,which is down in the passenger footwell under the glove box.an easy fix once you get it out.

zippy656 · 06-10-2009, 19:58

you get get a dlownload on how to fix it..

but its part of the site you pay your £10 for.. or just buy a new resistor.. ( more than a £10 :-)

05-10-2009, 19:38	#1
sperko Member Join Date: Aug 2009 Location: West Midlands Vehicle: Nissan Terrano 2 1999 2.7 Posts: 65	Heater blower don't blow Hi guys My blower motor has packed up but I put + Feed to the motor and every thing works and befor any bright spark says it Yes i've checked the fuses and there is no supply Is there a relay feeding the fuses ?? if so where is it don't want to start rewiring unless I have to PLEAS HELP GUYS IT GETTING BL--DY COLD IN THE MORNINGS I'm not an autosparky but an electrical service engineer I mend the stuff in garages and petrol stations so I do under stand the tecky talk If any of you guys need help with this type of gear you know where I am:confused

06-10-2009, 13:23	#8
Hilltop Senior Member Join Date: Mar 2006 Location: South wales Vehicle: 98 lwb 2.7 maverick Posts: 180	Blower relay Blower relay is on the back of the fuse box (inside car left of stering column) remove fuse box to get at it (2 screws) down load zips manual its all on there. Bob (Hilltop) ps> Its the bottom left hand relay when when you get the box off

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-10-2009, 19:57	#3
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,138	http://bebrs.pie-dabas.net/Webs/Terrano/R20/fwd.pdf try here, you might need to be blue to read it though.. should understand it I'm sure

05-10-2009, 20:34	#4
sperko Member Join Date: Aug 2009 Location: West Midlands Vehicle: Nissan Terrano 2 1999 2.7 Posts: 65	Cheers zippy656 there is a relay all I've got do now is find it

05-10-2009, 21:15	#5
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,138	thats cool, no worries. ill just say its black.. or gray.. could be green or blue too.

05-10-2009, 21:49	#6
sperko Member Join Date: Aug 2009 Location: West Midlands Vehicle: Nissan Terrano 2 1999 2.7 Posts: 65	zippy I have just been give a disc you could be inerested in from a friend in da motor trade nuge nuge wink wink

05-10-2009, 21:55	#7
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,138	oh, do tell??

06-10-2009, 19:58	#10
zippy656 Senior Member Join Date: Aug 2008 Location: Devizes Wiltshire Vehicle: Nissan Note Ntec 1.5 Posts: 14,138	you get get a dlownload on how to fix it.. but its part of the site you pay your £10 for.. or just buy a new resistor.. ( more than a £10 :-)