1998 T2 TDi LWB for sale

TOSKA · 13-09-2022, 21:57

Lengthy, but please read on .....

1998 T2 Tdi 2.7 LWB TDi R20 Bosch 213,000 M
MOT HAS EXPIRED CURRENTLY STILL TAXED AND INSURED

sadly has to go
All welded up and ready for MOT , then discovered O/S rear spring hanger gone.

Repairable, but a challenge.
slight dent rear quarter O/S
both bumpers repaired in past
Car is clean and in good order otherwise.
everything works except remotes ( central locking works )

Patched Cills both sides for MOT, all done
NEW Trailing arm poly bushes for MOT
NEW front shocks for MOT

all else believed OK then found rot at D/S rear spring hanger

full leather ( in good order )
factory fitted Tow bar
factory fitted sunroof
factory fitted Roof rails
factory fitted Bull bar
factory fitted side steps / rock sliders

offered for sale as repairable ..... please read on

£500 for the car

£600 for the car plus....

as NEW rear seat
NEW STARTER MOTOR
NEW fuel filter x3
NEW oil filter x1
NEW ( but used ) MAF x1
NEW ( but used ) air mass MAF assy incl MAF
NEW 82 Deg thermostat
NEW air filter x1
NEW front drop links x3
used Bosch MAF ( OK ?) x1
used auto hubs 1 OK 1 Faulty
used wheel hub cover cones ( plastic) x3
used front axle front bump stop ( OK )
NEW 3 point exhaust gasket
NEW exhaust middle mount bracket
NEW track rod end 1 x New 3 x new used
used digital accelerator pedal assy

>>>>>>>>>>>>> MORE >>>>>>
£650 for the car plus above and plus

4x 15 alloys with tyres ( ?)
'TUNIT STYLE ' BHP booster ( used )
>>>>>>>>>>>>>>>>>>>>>>>>

This is a repairable T2 if you are willing do do the welding

She is at 213,000 M but never used on veggie oil
regularly injector washed with FORTE or REDEX
semi syth oil regularly changed
engine gearbox etc all OK
4x4 box all OK

never off roaded

MUCH welding completed ... but sound apart from SPRING HANGER
......................................

I'd like this to go to a good home
the welding is a bit too much for the 'front lawn '
I've owned this truck for 11 years and she's great
Please save her !
......................................

PM me for any info
I'll struggle with photos on here, but can send lots via WHATSAPP

I'm looking to sell by monday 19th Nov

TOSKA

Fez_uk · 16-09-2022, 15:22

Cut the boot floor out to get to the spring hanger, Makes it much easier.

Cut both hangers off, As the others probably similar condition. Use a bit of C channel to bridge the chassis sides, Springs sit in the C channel.

TOSKA · 16-09-2022, 22:17

Thanks FEZ
I have considered doing it,
but its too much for outside on the lawn ! (in winter ! )
I'm hoping someone has the enthusiasm to take it on
TOSKA

TOSKA · 29-09-2022, 11:53

Now SOLD ...
The guy said he will fix it up .... I hope he does ......

The end of my Terrano days it would seem.
Mixed emotions .... I really liked that truck .

I hope to stick around about the forum if you lot will still have me !!

A REALY GREAT BIG THANK YOU TO EVERYONE who has helped over the last 13 years

all the best
TOSKA

13-09-2022, 21:57	#1
TOSKA Member Join Date: Dec 2010 Location: worcestershire Vehicle: 2.7 LWB Terrano 2TDi 1998 Posts: 53	1998 T2 TDi LWB for sale Lengthy, but please read on ..... 1998 T2 Tdi 2.7 LWB TDi R20 Bosch 213,000 M MOT HAS EXPIRED CURRENTLY STILL TAXED AND INSURED sadly has to go All welded up and ready for MOT , then discovered O/S rear spring hanger gone. Repairable, but a challenge. slight dent rear quarter O/S both bumpers repaired in past Car is clean and in good order otherwise. everything works except remotes ( central locking works ) Patched Cills both sides for MOT, all done NEW Trailing arm poly bushes for MOT NEW front shocks for MOT all else believed OK then found rot at D/S rear spring hanger full leather ( in good order ) factory fitted Tow bar factory fitted sunroof factory fitted Roof rails factory fitted Bull bar factory fitted side steps / rock sliders offered for sale as repairable ..... please read on £500 for the car £600 for the car plus.... as NEW rear seat NEW STARTER MOTOR NEW fuel filter x3 NEW oil filter x1 NEW ( but used ) MAF x1 NEW ( but used ) air mass MAF assy incl MAF NEW 82 Deg thermostat NEW air filter x1 NEW front drop links x3 used Bosch MAF ( OK ?) x1 used auto hubs 1 OK 1 Faulty used wheel hub cover cones ( plastic) x3 used front axle front bump stop ( OK ) NEW 3 point exhaust gasket NEW exhaust middle mount bracket NEW track rod end 1 x New 3 x new used used digital accelerator pedal assy >>>>>>>>>>>>> MORE >>>>>> £650 for the car plus above and plus 4x 15 alloys with tyres ( ?) 'TUNIT STYLE ' BHP booster ( used ) >>>>>>>>>>>>>>>>>>>>>>>> This is a repairable T2 if you are willing do do the welding She is at 213,000 M but never used on veggie oil regularly injector washed with FORTE or REDEX semi syth oil regularly changed engine gearbox etc all OK 4x4 box all OK never off roaded MUCH welding completed ... but sound apart from SPRING HANGER ...................................... I'd like this to go to a good home the welding is a bit too much for the 'front lawn ' I've owned this truck for 11 years and she's great Please save her ! ...................................... PM me for any info I'll struggle with photos on here, but can send lots via WHATSAPP I'm looking to sell by monday 19th Nov TOSKA

16-09-2022, 22:17	#3
TOSKA Member Join Date: Dec 2010 Location: worcestershire Vehicle: 2.7 LWB Terrano 2TDi 1998 Posts: 53	LWB for sale Thanks FEZ I have considered doing it, but its too much for outside on the lawn ! (in winter ! ) I'm hoping someone has the enthusiasm to take it on TOSKA

29-09-2022, 11:53	#4
TOSKA Member Join Date: Dec 2010 Location: worcestershire Vehicle: 2.7 LWB Terrano 2TDi 1998 Posts: 53	Sold sold sold Now SOLD ... The guy said he will fix it up .... I hope he does ...... The end of my Terrano days it would seem. Mixed emotions .... I really liked that truck . I hope to stick around about the forum if you lot will still have me !! A REALY GREAT BIG THANK YOU TO EVERYONE who has helped over the last 13 years all the best TOSKA

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

16-09-2022, 15:22	#2
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	Cut the boot floor out to get to the spring hanger, Makes it much easier. Cut both hangers off, As the others probably similar condition. Use a bit of C channel to bridge the chassis sides, Springs sit in the C channel.