|
|
|
|||||||
| The Clubs Virtual Pub For general chat, so come on in and pull up a chair. |
 |
|
|
Thread Tools | Display Modes |
11-08-2020, 18:00
|
#1 |
|
Off road maniac
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
|
Mrs 3 Ltr MOT today
Yep up for the test today, a bit overdue but took advantage of the 6 month deferment, gave me time to sand blast it all and spray underseal every where, replaced both bottom ball joints as boots were split together with the CVJ boots, across axle brake lines and NS rear seat belt mount needed a small plate, also sorted the sticking speedo, clean bill of health for another year, Rick
__________________
Ex banger racer now off road maniac  Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare. |
|
|
|
11-08-2020, 20:35
|
#2 |
|
Senior Member
 Join Date: Mar 2014
Location: Welcome to Norwich, a fine city
Vehicle: 2004 Terrano 3.0 SVE Auto
Posts: 3,601
|
Good man. Happy wife happy life
|
|
|
|
|
11-08-2020, 22:17
|
#3 |
|
Senior Member
Join Date: May 2011
Location: Worcestershire
Vehicle: Nissan Patrol Y61 2.8TD
Posts: 1,152
|
Well done Rick!
Just a word of caution. Be careful with the 6 months MOT extension as not every insurance company allows you to use it and invalidates your insurance! (Not an issue for you Rick, more for others reading this) |
|
|
|
|
12-08-2020, 00:56
|
#4 |
|
Off road maniac
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
|
Sorry did not take any pics, what with the sand and then the black stuff, was just not the place for a camera, suffice to say took 12 20Kg bags sand and 9 x 1ltr cans of spray underseal, re the insurance aspect they will find any excuse to invalidate a claim, and yes happy Mrs is a happy life and **** the world, it has gone beyond mad, Rick
__________________
Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare. |
|
|
|
|
12-08-2020, 09:33
|
#5 |
|
Senior Member
Join Date: Dec 2012
Location: clacton on sea essex
Vehicle: nissan terrano 2 2.7 tdi
Posts: 1,639
|
good job there rick.
|
|
|
|
|
12-08-2020, 19:31
|
#6 |
|
Senior Member
Join Date: Aug 2018
Location: Middlesex
Vehicle: '97 Terrano II 2.4 Xtreme
Posts: 368
|
Do you use kiln dried sand through an air sand blasting gun Rick? Works well, have you tried it through a jet wash attachment? Good media & cheap but worth mentioning the danger of silicosis attached to using it dry for those that may want to try.
Mike |
|
|
|
|
12-08-2020, 23:43
|
#7 |
|
Off road maniac
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
|
I recently tried glass beads as could not get kiln dried sand at the time, took ages to load it into the pot and the dust was untrue, worked OK but needed very different settings re grit supply/air supply, and if the two are mixed absolutely useless to get a regular pattern, so yes kiln dried sand is king, got the Patrol to re do after all the damage sustained off road so will try and post pics, Rick
__________________
Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare. |
|
|
|
|
12-08-2020, 23:49
|
#8 |
|
Off road maniac
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
|
Yes tried jet wash blasting in the past but flash rusting takes place far to quick and not worth the effort, even with two part epoxy paints that are supposed to cater for that, had a narrow boat and blasted that totally inside and out, so have much experience on this issue, Rick
__________________
Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare. |
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
