Help for Briggie please

solarman216 · 23-05-2020, 21:18

is anyone near Pete, (Briggie) he has a cooker problem and has had to turn the gas off at the meter so now no CH/HW he needs someone to disconnect the cooker via the bayonet connector, he cannot grip it, then he can turn his gas back on, Regards Rick

terranosaurusdoug · 23-05-2020, 21:52

Quote:

Originally Posted by solarman216

is anyone near Pete, (Briggie) he has a cooker problem and has had to turn the gas off at the meter so now no CH/HW he needs someone to disconnect the cooker via the bayonet connector, he cannot grip it, then he can turn his gas back on, Regards Rick

Where's he live??

solarman216 · 23-05-2020, 22:00

Brigghouse area, Rick

Banshee · 24-05-2020, 01:22

Not sure of anyone that way really other than Bigbunny but he's a hard man to get in touch with these days

solarman216 · 24-05-2020, 01:32

Think Jim's Terrano is close, Rick

solarman216 · 25-05-2020, 01:02

Thankfully a neighbors son came to his aid and now sorted, Rick

panelbeater · 25-05-2020, 09:16

i think i am right saying that if you have the push and twist gas pipe fitted you do not need a gas safe chap to remove and fit cooker.
at least he is sorted now.

macabethiel · 25-05-2020, 20:28

Quote:

Originally Posted by panelbeater

i think i am right saying that if you have the push and twist gas pipe fitted you do not need a gas safe chap to remove and fit cooker.
at least he is sorted now.

You are right but they can be difficult to disconnect if they are at the back of a cupboard and have been in place a long time.

solarman216 · 25-05-2020, 20:50

Quote:

Originally Posted by macabethiel

You are right but they can be difficult to disconnect if they are at the back of a cupboard and have been in place a long time.

Pete simply could not grip it, and yes that is the whole point of bayonet gas connectors, the householder can do it, Rick

23-05-2020, 21:18	#1
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Help for Briggie please is anyone near Pete, (Briggie) he has a cooker problem and has had to turn the gas off at the meter so now no CH/HW he needs someone to disconnect the cooker via the bayonet connector, he cannot grip it, then he can turn his gas back on, Regards Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

23-05-2020, 22:00	#3
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Brigghouse area, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

24-05-2020, 01:22	#4
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,526	Not sure of anyone that way really other than Bigbunny but he's a hard man to get in touch with these days __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

24-05-2020, 01:32	#5
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Think Jim's Terrano is close, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

25-05-2020, 01:02	#6
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Thankfully a neighbors son came to his aid and now sorted, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

25-05-2020, 09:16	#7
panelbeater Senior Member Join Date: Dec 2012 Location: clacton on sea essex Vehicle: nissan terrano 2 2.7 tdi Posts: 1,639	i think i am right saying that if you have the push and twist gas pipe fitted you do not need a gas safe chap to remove and fit cooker. at least he is sorted now.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode