"A" Bar

25-08-2007, 16:09

Hi all,could some one tell me how to fit an "A" bar on the front of my T2.If i was to match the four holes at the bottom,it seems i'll have to cut the bumper to attach the two other clamps half way up the bar.
Do i have to take the bumper off to attach these to the metal behind the bumper,put the bumper back on and cut a slit in the bumper so they join up.??if anybody wants pictures please email me!! :roll: :roll: :?:

25-08-2007, 20:03

is it for your year pre 96 different fittings

Jocky · 25-08-2007, 20:25

Looking at the car in your avatar you take off the grill between the headlights and there are pre drilled holes for mounting points.

The only models you needed to drill the bumper on were pre 1996

Take grill off and have a look. You also need to buy the correct ABar for the year of the car, Its not one size fits all

:smile:

25-08-2007, 20:56

If you take grill off should be pre-cut holes, same as when I put my Bullys on my 1994

Deleted Member S · 25-08-2007, 21:56

I got an email off Steve & I think it may be one off a Mistral :roll: Yes i'm being silly :roll: but could'nt it be made to fit ie new top brackets :?

25-08-2007, 23:09

Oh dear it looks as though i have the wrong bar then,thought they would be all the same The bar came off a nissan mistral p plate!! . ops: ops: :roll:

25-08-2007, 23:21

if its the one in your avtar its the newer one again with single headlight which may be different again try tbr website or formula4 itll tell you what your model is then search e bay for bargain!

theduck · 26-08-2007, 09:39

try 4x4tyresand accessorioes .co.uk please check my spelling but thay do these things.

27-08-2007, 20:47

Looks as though the bar is going back on ebay unless anybody is looking for one here?? come of a "P" reg Mistral..

28-08-2007, 19:40

I was just wondering if the bar has to have those top brackets,it would fit if i grind them of and have it on the four bolts at the bottom,i've seen other 4x4s with them attached only at the bottom?? :?:

theduck · 28-08-2007, 22:52

Mine attachs by two in the middle and two at the bottom, very fiddly to do the middle ones but I used mine till I worked out how to do it (attach the middle bolts :smile: )I think you will find it makes the bar more secure :wink:. Can't you redesign the brackets a bit :?: grind them off they will never be the same again :? .

supertaff · 29-08-2007, 10:13

My Mistral has an A-Bar that is only connected at the bottom - No top brackets.
All the best, Matt.

25-08-2007, 16:09	#1
Deleted Member Guest Posts: n/a	"A" Bar Hi all,could some one tell me how to fit an "A" bar on the front of my T2.If i was to match the four holes at the bottom,it seems i'll have to cut the bumper to attach the two other clamps half way up the bar. Do i have to take the bumper off to attach these to the metal behind the bumper,put the bumper back on and cut a slit in the bumper so they join up.??if anybody wants pictures please email me!! :roll: :roll: :?:

25-08-2007, 20:25	#3
Jocky Senior Member Join Date: Feb 2005 Location: Teesside,Englandshire, I only sleep there honest. Vehicle: Nissan Patrol 2.8 TD6 Y61 Posts: 1,420	Looking at the car in your avatar you take off the grill between the headlights and there are pre drilled holes for mounting points. The only models you needed to drill the bumper on were pre 1996 Take grill off and have a look. You also need to buy the correct ABar for the year of the car, Its not one size fits all :smile: __________________ (Y61) Patrol 2.8TD6 SE Touring.DPT Box. Ironman Nitro Shocks OME Springs 20mm lift front, 30mm lift rear. 33" General Grabber AT's, Airtec Snorkel, EGR Mod. 2.5" Stainless Exhaust

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

25-08-2007, 20:03	#2
jace Guest Posts: n/a	is it for your year pre 96 different fittings

25-08-2007, 20:56	#4
Guest Posts: n/a	If you take grill off should be pre-cut holes, same as when I put my Bullys on my 1994

25-08-2007, 21:56	#5
Deleted Member S Senior Member Join Date: Jun 2007 Posts: 2,711	I got an email off Steve & I think it may be one off a Mistral :roll: Yes i'm being silly :roll: but could'nt it be made to fit ie new top brackets :?

25-08-2007, 23:09	#6
Deleted Member Guest Posts: n/a	*Oh dear it looks as though i have the wrong bar then,thought they would be all the same The bar came off a nissan mistral p plate!! . ops: ops: :roll:*

25-08-2007, 23:21	#7
jace Guest Posts: n/a	if its the one in your avtar its the newer one again with single headlight which may be different again try tbr website or formula4 itll tell you what your model is then search e bay for bargain!

26-08-2007, 09:39	#8
theduck Senior Member Join Date: Mar 2006 Posts: 578	try 4x4tyresand accessorioes .co.uk please check my spelling but thay do these things.

27-08-2007, 20:47	#9
Deleted Member Guest Posts: n/a	*Looks as though the bar is going back on ebay unless anybody is looking for one here?? come of a "P" reg Mistral..*

28-08-2007, 19:40	#10
Deleted Member Guest Posts: n/a	I was just wondering if the bar has to have those top brackets,it would fit if i grind them of and have it on the four bolts at the bottom,i've seen other 4x4s with them attached only at the bottom?? :?:

28-08-2007, 22:52	#11
theduck Senior Member Join Date: Mar 2006 Posts: 578	Mine attachs by two in the middle and two at the bottom, very fiddly to do the middle ones but I used mine till I worked out how to do it (attach the middle bolts :smile: )I think you will find it makes the bar more secure :wink:. Can't you redesign the brackets a bit :?: grind them off they will never be the same again :? .

29-08-2007, 10:13	#12
supertaff Senior Member Join Date: Jun 2007 Location: Swansea, South Wales Vehicle: 1999 (V) Terrano II SE Posts: 273	My Mistral has an A-Bar that is only connected at the bottom - No top brackets. All the best, Matt.