|
The Clubs Virtual Pub For general chat, so come on in and pull up a chair. |
|
Thread Tools | Display Modes |
11-02-2016, 10:29 | #1 |
Senior Member
Join Date: May 2013
Location: South Yorkshire..
Vehicle: Nissan Terrano MK 2 SE
Posts: 1,757
|
Rear diff Carrier
Hi guys,can the rear diff carrier on a T2 be removed with out any special tools,and without damage.Thanks..
|
11-02-2016, 10:45 | #2 |
Off road maniac
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
|
depends on what diff you have, the heavy one that bolts in from the front comes out complete, just remove half shafts prop and nuts round diff, the later type remove half shafts cover plate on the rear four bolts on the outer bearings and the crown wheel and diff gear carrier will come out leaving the pinion in the axle, but will need setting up on replacement, Rick
__________________
Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare. |
11-02-2016, 11:38 | #3 |
Senior Member
Join Date: May 2013
Location: South Yorkshire..
Vehicle: Nissan Terrano MK 2 SE
Posts: 1,757
|
The one i was going to remove,is from a year 2000.Thanks Rick...
|
Thread Tools | |
Display Modes | |
|
|