These arrived at the weekend

Barrbeast · 01-12-2015, 00:56

Rock sliders for the Trol

Can't wait to get them fitted!

Daemo · 01-12-2015, 21:30

No pic...? I have some half built rocksliders in my garage, really need to get them finished..

Barrbeast · 01-12-2015, 22:14

Strange! Try this

Daemo · 01-12-2015, 22:58

Nice, where did you buy them babies from. Overseas? Clamp on type makes it nice and easy...

Barrbeast · 01-12-2015, 23:21

Lad on ebay, makes them order. Seem well made and he even goes to the trouble of welding a wee makers mark plate to them so must take pride in his work

elty001 · 02-12-2015, 00:20

Like the look of them Rob

Can't wait to see them fitted.

Daemo · 02-12-2015, 09:34

Is it the same guy that does the cool looking winch bumpers?

rockymtnslayer · 05-12-2015, 18:45

These look ace! Nice one!

Barrbeast · 08-12-2015, 22:25

Cheers guys

Yeh Daemo, he does bumpers too.

Check out what else arrived

solarman216 · 08-12-2015, 22:54

do you have a local guy who can machine the washers if they need it?

Barrbeast · 08-12-2015, 23:24

I'm going to stick into the garage to get fitted Rick, much as I'd like to give fitting a go myself I don't have the time

I'll drop it in after New Year and get the bus for a few days.

solarman216 · 08-12-2015, 23:49

Quote:

Originally Posted by Barrbeast

I'm going to stick into the garage to get fitted Rick, much as I'd like to give fitting a go myself I don't have the time

I'll drop it in after New Year and get the bus for a few days.

Wish you luck, most garages are only fit for remove and replace, strip a diff most will not have any idea whatsoever let alone machine washers, now you could send me the Lokka and I fit it to a spare diff and send it back, not pushing for work, got enough but just a thought, Rick

Barrbeast · 09-12-2015, 00:17

Quote:

Originally Posted by solarman216

Wish you luck, most garages are only fit for remove and replace, strip a diff most will not have any idea whatsoever let alone machine washers, now you could send me the Lokka and I fit it to a spare diff and send it back, not pushing for work, got enough but just a thought, Rick

Thanks Rick but no spare diff and if my rear diff hunt is anything to go by I reckon I'll struggle to get one without buying a whole axle

I reckon my guys would give it a go and I'll give them the installation guide and see what they think before I put the Trol into them. I'm pretty sure you can get different sized washers from Nissan if need be.

solarman216 · 09-12-2015, 02:01

Ah sorry forgot you have a Patrol, Rick

harlowmaverick · 10-12-2015, 08:26

Do you have the guys details that makes these?

01-12-2015, 00:56	#1
Barrbeast Senior Member Join Date: Mar 2013 Location: Dundee, Scotland Vehicle: 1990 4.2 SWB Safari Posts: 2,615	These arrived at the weekend Rock sliders for the Trol Can't wait to get them fitted!

08-12-2015, 22:54	#10
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	do you have a local guy who can machine the washers if they need it? __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

09-12-2015, 02:01	#14
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,431	Ah sorry forgot you have a Patrol, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-12-2015, 21:30	#2
Daemo Senior Member Join Date: Jun 2015 Location: Northamptonshire Vehicle: Patrol y61, safari y60. Posts: 466	No pic...? I have some half built rocksliders in my garage, really need to get them finished..

01-12-2015, 22:14	#3
Barrbeast Senior Member Join Date: Mar 2013 Location: Dundee, Scotland Vehicle: 1990 4.2 SWB Safari Posts: 2,615	Strange! Try this

01-12-2015, 22:58	#4
Daemo Senior Member Join Date: Jun 2015 Location: Northamptonshire Vehicle: Patrol y61, safari y60. Posts: 466	Nice, where did you buy them babies from. Overseas? Clamp on type makes it nice and easy...

01-12-2015, 23:21	#5
Barrbeast Senior Member Join Date: Mar 2013 Location: Dundee, Scotland Vehicle: 1990 4.2 SWB Safari Posts: 2,615	Lad on ebay, makes them order. Seem well made and he even goes to the trouble of welding a wee makers mark plate to them so must take pride in his work

02-12-2015, 00:20	#6
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,832	Like the look of them Rob Can't wait to see them fitted.

02-12-2015, 09:34	#7
Daemo Senior Member Join Date: Jun 2015 Location: Northamptonshire Vehicle: Patrol y61, safari y60. Posts: 466	Is it the same guy that does the cool looking winch bumpers?

05-12-2015, 18:45	#8
rockymtnslayer Senior Member Join Date: Dec 2015 Location: Edinburgh Vehicle: terrano 2.7 tdi SPORTY... Posts: 271	These look ace! Nice one!

08-12-2015, 22:25	#9
Barrbeast Senior Member Join Date: Mar 2013 Location: Dundee, Scotland Vehicle: 1990 4.2 SWB Safari Posts: 2,615	Cheers guys Yeh Daemo, he does bumpers too. Check out what else arrived

08-12-2015, 23:24	#11
Barrbeast Senior Member Join Date: Mar 2013 Location: Dundee, Scotland Vehicle: 1990 4.2 SWB Safari Posts: 2,615	I'm going to stick into the garage to get fitted Rick, much as I'd like to give fitting a go myself I don't have the time I'll drop it in after New Year and get the bus for a few days.

10-12-2015, 08:26	#15
harlowmaverick Senior Member Join Date: Jun 2009 Location: Harlow, Essex Vehicle: Nissan Terrano 3.0 tdi 03 Posts: 962	Do you have the guys details that makes these?