Go Back   :::.Nissan 4x4 Owners Club.::: > General > The Clubs Virtual Pub

The Clubs Virtual Pub For general chat, so come on in and pull up a chair.

Reply
 
Thread Tools Display Modes
Old 01-07-2015, 19:41   #1
The Patrolman
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Nov 2009
Location: Redcar, Teesside
Vehicle: Y60 Patrol 4.2 PeTroll
Posts: 2,122
Default Cool boxes -Who's got what??

Looking at electric cool boxes any recommendations
The Patrolman is offline   Reply With Quote
Old 01-07-2015, 19:56   #2
Eloco
Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2015
Location: North West
Vehicle: Terrano 3.0d 2003
Posts: 73
Default Cool Box

Just picked up a new one from Halfords 40LTR comes with 240v plug and cig lighter plug. Not fully tested yet but quiet on start up but for £80 after looking around hopefully a bargain.
Eloco is offline   Reply With Quote
Old 01-07-2015, 20:45   #3
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
Default

Most use a solid state heat pump, not sure that is the correct name for it, but runs on 12v and if you reverse the connections it makes the inside hot instead of cold, good for keeping your pasties/pies hot, not sure how the 240 works in this case, maybe it is a cold only version, or got a hot/cold switch, but they are very efficient, using them on laptops now I think as my new Lenovo is as cool as can be, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 01-07-2015, 21:17   #4
AlexD333
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2014
Location: Uk
Vehicle: 2004 Terrano 2.7 TDI
Posts: 7,847
Default

Is that a sprint st955i or rs955i in your display picture?!?!?

I'm getting awful excited
AlexD333 is offline   Reply With Quote
Old 01-07-2015, 22:10   #5
Eloco
Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2015
Location: North West
Vehicle: Terrano 3.0d 2003
Posts: 73
Default

After Rick's reply have totally got hold of the wrony end of the stick here very confused.
The bike is a daytona T595 Alex pre runner to the 955i. Finally managed to get pictures uploaded hope they meet with your approval
Eloco is offline   Reply With Quote
Old 01-07-2015, 22:16   #6
Lazy-Ferret
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jun 2012
Location: Sevenoaks, Kent
Vehicle: Terrano 2.7TDi SE Touring
Posts: 5,221
Default

Quote:
Originally Posted by solarman216 View Post
Most use a solid state heat pump, not sure that is the correct name for it, but runs on 12v and if you reverse the connections it makes the inside hot instead of cold, good for keeping your pasties/pies hot, not sure how the 240 works in this case, maybe it is a cold only version, or got a hot/cold switch, but they are very efficient, using them on laptops now I think as my new Lenovo is as cool as can be, Rick
Peltier is the word you are looking for....

The 240V, is just a case of stepping down to 12v, and rectifying, as most now have a Hot/Cold switch to do the voltage reversal, rather than reversing the plug like you did in the old days.

Meant to say I have a 1994 Hella one in bright Pink and light Blue, that was an optional extra with the Vitara.
Lazy-Ferret is offline   Reply With Quote
Old 01-07-2015, 22:18   #7
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
Default

Quote:
Originally Posted by Eloco View Post
After Rick's reply have totally got hold of the wrony end of the stick here very confused.
Why is that? these devices are used in cool boxes and a multitude of other applications, I was merely describing the technology behind the application, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 01-07-2015, 22:22   #8
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
Default

Quote:
Originally Posted by Lazy-Ferret View Post
Peltier is the word you are looking for....

The 240V, is just a case of stepping down to 12v, and rectifying, as most now have a Hot/Cold switch to do the voltage reversal, rather than reversing the plug like you did in the old days.

Meant to say I have a 1994 Hella one in bright Pink and light Blue, that was an optional extra with the Vitara.
thanks Clive, knew there was a term but mind just went blank, just read your ferret story, hope your pecker has recovered, ouch big time, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 01-07-2015, 22:28   #9
emjaybee
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Jul 2014
Location: Oxfordshire
Vehicle: 3.0Di SVE '05 5 door.
Posts: 1,536
Default

I bought a Halfords Cooler/Warmer 40ltr a few years ago.

If you want to use it in a vehicle it works best if you get it "cold" by running it up in the house for a couple of hours before putting it in your vehicle with your cold stuff. It isn't great at getting stuff cooled, but it's not bad at keeping stuff cool that was already cool. (I think that makes sense).

emjaybee is offline   Reply With Quote
Old 01-07-2015, 22:36   #10
jims-terrano
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Sep 2004
Location: UK
Posts: 12,965
Default

We got a camping gaz cool box, only cools and I managed to pick up a mains power supply for it. Nice unit and does cool but I find cool everything first and even use an ice block or two, thinks better at keeping cool rather than cooling. I find the fan at the top tends to drag dust in to the vents and looks mucky.

Not sure what they use to insulate if anything, I'd love to open it up and add insulation.
jims-terrano is offline   Reply With Quote
Old 01-07-2015, 22:37   #11
Eloco
Member
Click here to find out how to become a paid up member
 
Join Date: Jan 2015
Location: North West
Vehicle: Terrano 3.0d 2003
Posts: 73
Default

With you now. This is why I don't normally post.

Sent from my HTC One M9 using Tapatalk
Eloco is offline   Reply With Quote
Old 01-07-2015, 22:39   #12
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
Default

Quote:
Originally Posted by jims-terrano View Post

Not sure what they use to insulate if anything, I'd love to open it up and add insulation.
Polystyrene mostly a poor contender against polyurethane, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 01-07-2015, 22:42   #13
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,431
Default

Quote:
Originally Posted by Eloco View Post
With you now. This is why I don't normally post.

Sent from my HTC One M9 using Tapatalk
go on post and learn, you will not be slated of for not knowing, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 01-07-2015, 22:45   #14
jims-terrano
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Sep 2004
Location: UK
Posts: 12,965
Default

Quote:
Originally Posted by solarman216 View Post
go on post and learn, you will not be slated of for not knowing, Rick
Agreed
jims-terrano is offline   Reply With Quote
Old 01-07-2015, 22:48   #15
jims-terrano
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Sep 2004
Location: UK
Posts: 12,965
Default

When I was a teenager my mates dad once made a coolbox at work. Just a simple plywood box but well made. Lined with 40mm polystyrene wrapped in foil, even the lid. No gaps at all, really well made and far better than any shop bought box. Maybe that's the way to go and line it with kingspan off cuts or something.
jims-terrano is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 11:53.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Images online photo albums